[PATCH v3 8/9] mtd: nand: ecc-bch: Use the public nsteps field

[Miquel Raynal]

The software BCH ECC engine stores the nsteps variable in its own
private structure while it is also exported as a public ECC field.

Let's get rid of the redundant private one and let's use the
nand_ecc_context structure when possible.

Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/ecc-sw-bch.c       | 9 ++++-----
 include/linux/mtd/nand-ecc-sw-bch.h | 2 --
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/ecc-sw-bch.c b/drivers/mtd/nand/ecc-sw-bch.c
index 5018bc0db626..405552d014a8 100644
--- a/drivers/mtd/nand/ecc-sw-bch.c
+++ b/drivers/mtd/nand/ecc-sw-bch.c
@@ -236,7 +236,6 @@ int nand_ecc_sw_bch_init_ctx(struct nand_device *nand)
 		goto free_engine_conf;
 
 	engine_conf->code_size = code_size;
-	engine_conf->nsteps = nsteps;
 	engine_conf->calc_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 	engine_conf->code_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 	if (!engine_conf->calc_buf || !engine_conf->code_buf) {
@@ -254,7 +253,7 @@ int nand_ecc_sw_bch_init_ctx(struct nand_device *nand)
 
 	/* Verify the layout validity */
 	if (mtd_ooblayout_count_eccbytes(mtd) !=
-	    engine_conf->nsteps * engine_conf->code_size) {
+	    nand->ecc.ctx.nsteps * engine_conf->code_size) {
 		pr_err("Invalid ECC layout\n");
 		ret = -EINVAL;
 		goto cleanup_bch_ctx;
@@ -296,7 +295,7 @@ static int nand_ecc_sw_bch_prepare_io_req(struct nand_device *nand,
 	struct mtd_info *mtd = nanddev_to_mtd(nand);
 	int eccsize = nand->ecc.ctx.conf.step_size;
 	int eccbytes = engine_conf->code_size;
-	int eccsteps = engine_conf->nsteps;
+	int eccsteps = nand->ecc.ctx.nsteps;
 	int total = nand->ecc.ctx.total;
 	u8 *ecccalc = engine_conf->calc_buf;
 	const u8 *data;
@@ -334,7 +333,7 @@ static int nand_ecc_sw_bch_finish_io_req(struct nand_device *nand,
 	int eccsize = nand->ecc.ctx.conf.step_size;
 	int total = nand->ecc.ctx.total;
 	int eccbytes = engine_conf->code_size;
-	int eccsteps = engine_conf->nsteps;
+	int eccsteps = nand->ecc.ctx.nsteps;
 	u8 *ecccalc = engine_conf->calc_buf;
 	u8 *ecccode = engine_conf->code_buf;
 	unsigned int max_bitflips = 0;
@@ -366,7 +365,7 @@ static int nand_ecc_sw_bch_finish_io_req(struct nand_device *nand,
 		nand_ecc_sw_bch_calculate(nand, data, &ecccalc[i]);
 
 	/* Finish a page read: compare and correct */
-	for (eccsteps = engine_conf->nsteps, i = 0, data = req->databuf.in;
+	for (eccsteps = nand->ecc.ctx.nsteps, i = 0, data = req->databuf.in;
 	     eccsteps;
 	     eccsteps--, i += eccbytes, data += eccsize) {
 		int stat =  nand_ecc_sw_bch_correct(nand, data,
diff --git a/include/linux/mtd/nand-ecc-sw-bch.h b/include/linux/mtd/nand-ecc-sw-bch.h
index 22c92073b3dd..9da9969505a8 100644
--- a/include/linux/mtd/nand-ecc-sw-bch.h
+++ b/include/linux/mtd/nand-ecc-sw-bch.h
@@ -16,7 +16,6 @@
  * @req_ctx: Save request context and tweak the original request to fit the
  *           engine needs
  * @code_size: Number of bytes needed to store a code (one code per step)
- * @nsteps: Number of steps
  * @calc_buf: Buffer to use when calculating ECC bytes
  * @code_buf: Buffer to use when reading (raw) ECC bytes from the chip
  * @bch: BCH control structure
@@ -26,7 +25,6 @@
 struct nand_ecc_sw_bch_conf {
 	struct nand_ecc_req_tweak_ctx req_ctx;
 	unsigned int code_size;
-	unsigned int nsteps;
 	u8 *calc_buf;
 	u8 *code_buf;
 	struct bch_control *bch;
-- 
2.20.1