[PATCH v3 6/9] mtd: rawnand: Try not to use the ECC private structures

[Miquel Raynal]

Most of the time, there is no need to use the software ECC Hamming and
BCH algorithms private context to know their configuration. All the
data has been stored by their ->init_ctx() hook in the generic NAND
ECC engine structure, so use this one when possible.

Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/raw/nand_base.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index c33fa1b1847f..4e1bd1e5d474 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5162,8 +5162,8 @@ int rawnand_sw_hamming_init(struct nand_chip *chip)
 	chip->ecc.size = base->ecc.ctx.conf.step_size;
 	chip->ecc.strength = base->ecc.ctx.conf.strength;
 	chip->ecc.total = base->ecc.ctx.total;
-	chip->ecc.steps = engine_conf->nsteps;
-	chip->ecc.bytes = engine_conf->code_size;
+	chip->ecc.steps = nanddev_get_ecc_nsteps(base);
+	chip->ecc.bytes = base->ecc.ctx.total / nanddev_get_ecc_nsteps(base);
 
 	return 0;
 }
@@ -5201,7 +5201,7 @@ EXPORT_SYMBOL(rawnand_sw_hamming_cleanup);
 int rawnand_sw_bch_init(struct nand_chip *chip)
 {
 	struct nand_device *base = &chip->base;
-	struct nand_ecc_sw_bch_conf *engine_conf;
+	const struct nand_ecc_props *ecc_conf = nanddev_get_ecc_conf(base);
 	int ret;
 
 	base->ecc.user_conf.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
@@ -5213,13 +5213,11 @@ int rawnand_sw_bch_init(struct nand_chip *chip)
 	if (ret)
 		return ret;
 
-	engine_conf = base->ecc.ctx.priv;
-
-	chip->ecc.size = base->ecc.ctx.conf.step_size;
-	chip->ecc.strength = base->ecc.ctx.conf.strength;
+	chip->ecc.size = ecc_conf->step_size;
+	chip->ecc.strength = ecc_conf->strength;
 	chip->ecc.total = base->ecc.ctx.total;
-	chip->ecc.steps = engine_conf->nsteps;
-	chip->ecc.bytes = engine_conf->code_size;
+	chip->ecc.steps = nanddev_get_ecc_nsteps(base);
+	chip->ecc.bytes = base->ecc.ctx.total / nanddev_get_ecc_nsteps(base);
 
 	return 0;
 }
-- 
2.20.1