[PATCH v2 2/2] mtd: spi-nor: sst: Add support for Global Unlock on sst26vf
Michael Walle
michael at walle.cc
Wed Jan 20 09:05:22 EST 2021
Am 2021-01-20 14:19, schrieb Tudor Ambarus:
> Even if sst26vf shares the SPINOR_OP_GBULK opcode with
> Macronix (ex. MX25U12835F) and Winbound (ex. W25Q128FV),
> it has its own Individual Block Protection scheme, which
> is also capable to read-lock individual parameter blocks.
> Thus the sst26vf's Individual Block Protection scheme will
> reside in the sst.c manufacturer driver.
>
> Add support to unlock the entire flash memory. The device
> is write-protected by default after a power-on reset cycle
> (volatile software protection), in order to avoid inadvertent
> writes during power-up. Could do an erase, write, read back,
> and compare when MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
> ---
Damn, who on earth assigned the "block protection" bits to the
8/32/64kb sectors on the flash (SST26VF064B DS, Table 5-6). That is
nuts.
Except one comment below:
Reviewed-by: Michael Walle <michael at walle.cc>
> v2: s/!ofs/ofs == 0/
>
> drivers/mtd/spi-nor/sst.c | 38 ++++++++++++++++++++++++++++++++++++--
> 1 file changed, 36 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
> index 00e48da0744a..d6e1396abb96 100644
> --- a/drivers/mtd/spi-nor/sst.c
> +++ b/drivers/mtd/spi-nor/sst.c
> @@ -8,6 +8,39 @@
>
> #include "core.h"
>
> +static int sst26vf_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> +static int sst26vf_unlock(struct spi_nor *nor, loff_t ofs, uint64_t
> len)
> +{
> + if (ofs == 0 && len == nor->params->size)
> + return spi_nor_global_block_unlock(nor);
Some blocks might not be unlocked because they are permanently
locked. Does it make sense to read BPNV of the control register
and add a debug message here?
-michael
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static int sst26vf_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t
> len)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> +static const struct spi_nor_locking_ops sst26vf_locking_ops = {
> + .lock = sst26vf_lock,
> + .unlock = sst26vf_unlock,
> + .is_locked = sst26vf_is_locked,
> +};
> +
> +static void sst26vf_default_init(struct spi_nor *nor)
> +{
> + nor->params->locking_ops = &sst26vf_locking_ops;
> +}
> +
> +static const struct spi_nor_fixups sst26vf_fixups = {
> + .default_init = sst26vf_default_init,
> +};
> +
> static const struct flash_info sst_parts[] = {
> /* SST -- large erase sizes are "overlays", "sectors" are 4K */
> { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
> @@ -39,8 +72,9 @@ static const struct flash_info sst_parts[] = {
> { "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32,
> SECT_4K | SPI_NOR_DUAL_READ) },
> { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128,
> - SECT_4K | SPI_NOR_DUAL_READ |
> - SPI_NOR_QUAD_READ) },
> + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> + SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
> + .fixups = &sst26vf_fixups },
> };
>
> static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
More information about the linux-mtd
mailing list