[PATCH 2/2] mtd: spi-nor: sst: Add support for Global Unlock on sst26vf
Tudor Ambarus
tudor.ambarus at microchip.com
Wed Jan 20 05:54:11 EST 2021
Even if sst26vf shares the SPINOR_OP_GBULK opcode with
Macronix (ex. MX25U12835F) and Winbound (ex. W25Q128FV),
it has its own Individual Block Protection scheme, which
is also capable to read-lock individual parameter blocks.
Thus the sst26vf's Individual Block Protection scheme will
reside in the sst.c manufacturer driver.
Add support to unlock the entire flash memory. The device
is write-protected by default after a power-on reset cycle
(volatile software protection), in order to avoid inadvertent
writes during power-up. Could do an erase, write, read back,
and compare when MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y.
Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
drivers/mtd/spi-nor/sst.c | 38 ++++++++++++++++++++++++++++++++++++--
1 file changed, 36 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 00e48da0744a..1cd2a360c41e 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -8,6 +8,39 @@
#include "core.h"
+static int sst26vf_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ return -EOPNOTSUPP;
+}
+
+static int sst26vf_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ if (!ofs && len == nor->params->size)
+ return spi_nor_global_block_unlock(nor);
+
+ return -EOPNOTSUPP;
+}
+
+static int sst26vf_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ return -EOPNOTSUPP;
+}
+
+static const struct spi_nor_locking_ops sst26vf_locking_ops = {
+ .lock = sst26vf_lock,
+ .unlock = sst26vf_unlock,
+ .is_locked = sst26vf_is_locked,
+};
+
+static void sst26vf_default_init(struct spi_nor *nor)
+{
+ nor->params->locking_ops = &sst26vf_locking_ops;
+}
+
+static const struct spi_nor_fixups sst26vf_fixups = {
+ .default_init = sst26vf_default_init,
+};
+
static const struct flash_info sst_parts[] = {
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
@@ -39,8 +72,9 @@ static const struct flash_info sst_parts[] = {
{ "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32,
SECT_4K | SPI_NOR_DUAL_READ) },
{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ) },
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+ .fixups = &sst26vf_fixups },
};
static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
--
2.25.1
More information about the linux-mtd
mailing list