[PATCH] mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC engine

[Miquel Raynal]

I have been fooled by the logic picking the right ECC engine which is
spread across two functions: *init_module() and *_attach(). I thought
this driver was not impacted by the recent changes around the ECC
engines DT parsing logic but in fact it is.

Reported-by: kernel test robot <oliver.sang at intel.com>
Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
Cc: stable at vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/raw/nandsim.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index f2b9250c0ea8..0750121ac371 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2210,6 +2210,9 @@ static int ns_attach_chip(struct nand_chip *chip)
 {
 	unsigned int eccsteps, eccbytes;
 
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	chip->ecc.algo = bch ? NAND_ECC_ALGO_BCH : NAND_ECC_ALGO_HAMMING;
+
 	if (!bch)
 		return 0;
 
@@ -2233,8 +2236,6 @@ static int ns_attach_chip(struct nand_chip *chip)
 		return -EINVAL;
 	}
 
-	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-	chip->ecc.algo = NAND_ECC_ALGO_BCH;
 	chip->ecc.size = 512;
 	chip->ecc.strength = bch;
 	chip->ecc.bytes = eccbytes;
@@ -2273,8 +2274,6 @@ static int __init ns_init_module(void)
 	nsmtd       = nand_to_mtd(chip);
 	nand_set_controller_data(chip, (void *)ns);
 
-	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-	chip->ecc.algo   = NAND_ECC_ALGO_HAMMING;
 	/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
 	/* and 'badblocks' parameters to work */
 	chip->options   |= NAND_SKIP_BBTSCAN;
-- 
2.20.1