[PATCH] mtd: rawnand: qcom: update last code word register
mdalam at codeaurora.org
mdalam at codeaurora.org
Tue Feb 23 14:43:42 EST 2021
On 2021-02-23 22:04, Miquel Raynal wrote:
> Hello,
>
> Md Sadre Alam <mdalam at codeaurora.org> wrote on Tue, 23 Feb 2021
> 01:34:27 +0530:
>
>> From QPIC version 2.0 onwards new register got added to read last
>
> a new
>
>> codeword. This change will add the READ_LOCATION_LAST_CW_n register.
>
> Add support for this READ_LOCATION_LAST_CW_n register.
>
>>
>> For first three code word READ_LOCATION_n register will be
>> use.For last code word READ_LOCATION_LAST_CW_n register will be
>> use.
>
> "
> In the case of QPIC v2, codewords 0, 1 and 2 will be accessed through
> READ_LOCATION_n, while codeword 3 will be accessed through
> READ_LOCATION_LAST_CW_n.
> "
>
> When I read my own sentence, I feel that there is something wrong.
> If there are only 4 codewords, I guess a QPIC v2 is able to use
> READ_LOCATION_3 or READ_LOCATION_LAST_CW_0 interchangeably. Isn't it?
>
> I guess the point of having these "last_cw_n" registers is to support
> up to 8 codewords, am I wrong? If this the case, the current patch
> completely fails doing that I don't get the point of such change.
This register is only use to read last code word.
I have address all the comments from all the previous sub sequent
patches and pushed
all patches in only one series.
Please check.
>
>> Signed-off-by: Md Sadre Alam <mdalam at codeaurora.org>
>> ---
>
> [...]
>
>> /* helper to configure address register values */
>> @@ -700,8 +727,9 @@ static void set_address(struct qcom_nand_host
>> *host, u16 column, int page)
>> *
>> * @num_cw: number of steps for the read/write operation
>> * @read: read or write operation
>> + * @cw : which code word
>> */
>> -static void update_rw_regs(struct qcom_nand_host *host, int num_cw,
>> bool read)
>> +static void update_rw_regs(struct qcom_nand_host *host, int num_cw,
>> bool read, int cw)
>> {
>> struct nand_chip *chip = &host->chip;
>> struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
>> @@ -740,7 +768,7 @@ static void update_rw_regs(struct qcom_nand_host
>> *host, int num_cw, bool read)
>> nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
>>
>> if (read)
>> - nandc_set_read_loc(chip, 0, 0, 0, host->use_ecc ?
>> + nandc_set_read_loc(chip, cw, 0, 0, host->use_ecc ?
>> host->cw_data : host->cw_size, 1);
>> }
>>
>> @@ -1111,18 +1139,34 @@ static void config_nand_page_read(struct
>> nand_chip *chip)
>> NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
>> }
>>
>> +/* helper to check which location register should be use for this
>
> /*
> * Check which location...
>
>> + * code word. NAND_READ_LOCATION or NAND_READ_LOCATION_LAST_CW
>> + */
>> +static bool config_loc_last_reg(struct nand_chip *chip, int cw)
>> +{
>> + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
>> + struct nand_ecc_ctrl *ecc = &chip->ecc;
>> +
>> + if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
>> + return true;
>
> Not sure this is really useful, it's probably better to drop this
> helper and just use...
>
>> +
>> + return false;
>> +}
>> /*
>> * Helper to prepare DMA descriptors for configuring registers
>> * before reading each codeword in NAND page.
>> */
>> static void
>> -config_nand_cw_read(struct nand_chip *chip, bool use_ecc)
>> +config_nand_cw_read(struct nand_chip *chip, bool use_ecc, int cw)
>> {
>> struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
>> + int reg = NAND_READ_LOCATION_0;
>> +
>> + if (config_loc_last_reg(chip, cw))
>
> ... if (nandc->props->qpic_v2 && qcom_nandc_is_lastcw()) here.
>
>> + reg = NAND_READ_LOCATION_LAST_CW_0;
>>
>> if (nandc->props->is_bam)
>> - write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
>> - NAND_BAM_NEXT_SGL);
>> + write_reg_dma(nandc, reg, 4, NAND_BAM_NEXT_SGL);
>>
>> write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
>> write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
>> @@ -1142,12 +1186,12 @@ config_nand_cw_read(struct nand_chip *chip,
>> bool use_ecc)
>
> Thanks,
> Miquèl
More information about the linux-mtd
mailing list