[PATCH] mtd: rawnand: qcom: Update register macro name for 0x2c offset

[Manivannan Sadhasivam]

On Sun, Jan 31, 2021 at 01:37:16AM +0530, Md Sadre Alam wrote:
> This change will remove unused register name macro NAND_DEV1_ECC_CFG.
> Since this register was only available in QPIC version 1.4.20 ipq40xx
> and it was not used. In QPIC version 1.5 on wards this register got
> removed.In QPIC version 2.0 0x2c offset is updated with register
> NAND_AUTO_STATUS_EN So adding this register macro NAND_AUTO_STATUS_EN
> with offset 0x2c.
> 
> Signed-off-by: Md Sadre Alam <mdalam at codeaurora.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

Thanks,
Mani

> ---
>  drivers/mtd/nand/raw/qcom_nandc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index 9484be8..c238a35 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -27,7 +27,7 @@
>  #define	NAND_DEV0_CFG0			0x20
>  #define	NAND_DEV0_CFG1			0x24
>  #define	NAND_DEV0_ECC_CFG		0x28
> -#define	NAND_DEV1_ECC_CFG		0x2c
> +#define	NAND_AUTO_STATUS_EN		0x2c
>  #define	NAND_DEV1_CFG0			0x30
>  #define	NAND_DEV1_CFG1			0x34
>  #define	NAND_READ_ID			0x40
> -- 
> 2.7.4
>