[PATCH v3 16/17] mtd: spinand: winbond: Rename cache op_variants struct variable
Apurva Nandan
a-nandan at ti.com
Fri Dec 31 23:42:49 PST 2021
Till now, supported Winbond SPI NAND flashes had same supported
op_variants. W35N01JW introduces Octal DTR SPI IO mode, so now
different op_variants struct variables are required for different
Winbond flashes. Hence, rename and append the flash name in the
op_variants struct variable.
Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf
Signed-off-by: Apurva Nandan <a-nandan at ti.com>
---
drivers/mtd/nand/spi/winbond.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index d8eccb40c80f..5b943169120e 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -26,7 +26,7 @@
#define WINBOND_VCR_DUMMY_CLK_DEFAULT 0xFF
#define WINBOND_VCR_DUMMY_CLK_ADDR 0x01
-static SPINAND_OP_VARIANTS(read_cache_variants,
+static SPINAND_OP_VARIANTS(read_cache_variants_w25xxgv,
SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
@@ -34,11 +34,11 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-static SPINAND_OP_VARIANTS(write_cache_variants,
+static SPINAND_OP_VARIANTS(write_cache_variants_w25xxgv,
SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
SPINAND_PROG_LOAD(true, 0, NULL, 0));
-static SPINAND_OP_VARIANTS(update_cache_variants,
+static SPINAND_OP_VARIANTS(update_cache_variants_w25xxgv,
SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
SPINAND_PROG_LOAD(false, 0, NULL, 0));
@@ -90,9 +90,9 @@ static const struct spinand_info winbond_spinand_table[] = {
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab),
NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 2),
NAND_ECCREQ(1, 512),
- SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
- &write_cache_variants,
- &update_cache_variants),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_w25xxgv,
+ &write_cache_variants_w25xxgv,
+ &update_cache_variants_w25xxgv),
0,
SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
SPINAND_SELECT_TARGET(w25m02gv_select_target)),
@@ -100,9 +100,9 @@ static const struct spinand_info winbond_spinand_table[] = {
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa),
NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(1, 512),
- SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
- &write_cache_variants,
- &update_cache_variants),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_w25xxgv,
+ &write_cache_variants_w25xxgv,
+ &update_cache_variants_w25xxgv),
0,
SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
};
--
2.25.1
More information about the linux-mtd
mailing list