[PATCH v3 08/17] mtd: spinand: Add support for manufacturer-based ctrl_ops variations

[Apurva Nandan]

Add ctrl_ops_variants, which can be used by the manufacturers' codes
to define their SPI control operation variants. Add a macro to easily
define ctrl_ops_varinats. This can be used to list out all the
supported ctrl ops with their respective protocols by the vendors.

Add spinand_select_ctrl_ops_variant() helper function to search for
a supported ctrl_ops variant with the required SPI protocol in a given
list of variants.

Signed-off-by: Apurva Nandan <a-nandan at ti.com>
---
 drivers/mtd/nand/spi/core.c | 36 ++++++++++++++++++++++++++++++++++++
 include/linux/mtd/spinand.h | 17 +++++++++++++++++
 2 files changed, 53 insertions(+)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 30e90527ee3c..9688fdfc174e 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -1031,6 +1031,42 @@ spinand_select_data_op_variant(struct spinand_device *spinand,
 	return NULL;
 }
 
+static const struct spinand_ctrl_ops *
+spinand_select_ctrl_ops_variant(struct spinand_device *spinand,
+				const struct spinand_ctrl_ops_variants *variants,
+				const enum spinand_protocol protocol)
+{
+	unsigned int i;
+
+	for (i = 0; i < variants->nvariants; i++) {
+		const struct spinand_ctrl_ops *ctrl_ops =
+			&variants->ctrl_ops_list[i];
+
+		if (ctrl_ops->protocol != protocol)
+			continue;
+
+		if (!spi_mem_supports_op(spinand->spimem,
+					 &ctrl_ops->ops.reset) ||
+		    !spi_mem_supports_op(spinand->spimem,
+					 &ctrl_ops->ops.get_feature) ||
+		    !spi_mem_supports_op(spinand->spimem,
+					 &ctrl_ops->ops.set_feature) ||
+		    !spi_mem_supports_op(spinand->spimem,
+					 &ctrl_ops->ops.write_enable) ||
+		    !spi_mem_supports_op(spinand->spimem,
+					 &ctrl_ops->ops.block_erase) ||
+		    !spi_mem_supports_op(spinand->spimem,
+					 &ctrl_ops->ops.page_read) ||
+		    !spi_mem_supports_op(spinand->spimem,
+					 &ctrl_ops->ops.program_execute))
+			continue;
+
+		return ctrl_ops;
+	}
+
+	return NULL;
+}
+
 /**
  * spinand_match_and_init() - Try to find a match between a device ID and an
  *			      entry in a spinand_info table
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index e5df6220ec1e..5dae0649f2fb 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -385,6 +385,18 @@ struct spinand_ctrl_ops {
 		.protocol = __protocol,						\
 	}
 
+struct spinand_ctrl_ops_variants {
+	const struct spinand_ctrl_ops *ctrl_ops_list;
+	unsigned int nvariants;
+};
+
+#define SPINAND_CTRL_OPS_VARIANTS(name, ...)					\
+	const struct spinand_ctrl_ops_variants name = {				\
+		.ctrl_ops_list = (struct spinand_ctrl_ops[]){ __VA_ARGS__ },	\
+		.nvariants = sizeof((struct spinand_ctrl_ops[]){ __VA_ARGS__ })/\
+			     sizeof(struct spinand_ctrl_ops),			\
+	}
+
 /**
  * spinand_ecc_info - description of the on-die ECC implemented by a SPI NAND
  *		      chip
@@ -442,6 +454,8 @@ struct spinand_info {
 		const struct spinand_op_variants *write_cache;
 		const struct spinand_op_variants *update_cache;
 	} data_ops_variants;
+
+	const struct spinand_ctrl_ops_variants *ctrl_ops_variants;
 	int (*select_target)(struct spinand_device *spinand,
 			     unsigned int target);
 };
@@ -460,6 +474,9 @@ struct spinand_info {
 		.update_cache = __update,				\
 	}
 
+#define SPINAND_INFO_CTRL_OPS_VARIANTS(__ctrl_ops_variants)		\
+	.ctrl_ops_variants = __ctrl_ops_variants
+
 #define SPINAND_ECCINFO(__ooblayout, __get_status)			\
 	.eccinfo = {							\
 		.ooblayout = __ooblayout,				\
-- 
2.25.1