[PATCH 5/9] mtd: rawnand: brcmnand: Allow working without interrupts
Florian Fainelli
f.fainelli at gmail.com
Wed Dec 22 16:22:21 PST 2021
The BCMA devices include the brcmnand controller but they do not wire up
any interrupt line, allow the main interrupt to be optional and update
the completion path to also check for the lack of an interrupt line.
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 52 +++++++++++-------------
1 file changed, 24 insertions(+), 28 deletions(-)
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 60a7f375df83..e7947cff4dd1 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -213,7 +213,7 @@ struct brcmnand_controller {
void __iomem *nand_base;
void __iomem *nand_fc; /* flash cache */
void __iomem *flash_dma_base;
- unsigned int irq;
+ int irq;
unsigned int dma_irq;
int nand_version;
@@ -1602,7 +1602,7 @@ static bool brcmstb_nand_wait_for_completion(struct nand_chip *chip)
bool err = false;
int sts;
- if (mtd->oops_panic_write) {
+ if (mtd->oops_panic_write || ctrl->irq < 0) {
/* switch to interrupt polling and PIO mode */
disable_ctrl_irqs(ctrl);
sts = bcmnand_ctrl_poll_status(ctrl, NAND_CTRL_RDY,
@@ -3130,33 +3130,29 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
}
/* IRQ */
- ctrl->irq = platform_get_irq(pdev, 0);
- if ((int)ctrl->irq < 0) {
- dev_err(dev, "no IRQ defined\n");
- ret = -ENODEV;
- goto err;
- }
-
- /*
- * Some SoCs integrate this controller (e.g., its interrupt bits) in
- * interesting ways
- */
- if (soc) {
- ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
- DRV_NAME, ctrl);
+ ctrl->irq = platform_get_irq_optional(pdev, 0);
+ if (ctrl->irq >= 0) {
+ /*
+ * Some SoCs integrate this controller (e.g., its interrupt bits) in
+ * interesting ways
+ */
+ if (soc) {
+ ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
+ DRV_NAME, ctrl);
- /* Enable interrupt */
- ctrl->soc->ctlrdy_ack(ctrl->soc);
- ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
- } else {
- /* Use standard interrupt infrastructure */
- ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
- DRV_NAME, ctrl);
- }
- if (ret < 0) {
- dev_err(dev, "can't allocate IRQ %d: error %d\n",
- ctrl->irq, ret);
- goto err;
+ /* Enable interrupt */
+ ctrl->soc->ctlrdy_ack(ctrl->soc);
+ ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
+ } else {
+ /* Use standard interrupt infrastructure */
+ ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
+ DRV_NAME, ctrl);
+ }
+ if (ret < 0) {
+ dev_err(dev, "can't allocate IRQ %d: error %d\n",
+ ctrl->irq, ret);
+ goto err;
+ }
}
for_each_available_child_of_node(dn, child) {
--
2.25.1
More information about the linux-mtd
mailing list