[PATCH v6 1/4] dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller

[Geert Uytterhoeven]

Hi Miquel,

On Fri, Dec 17, 2021 at 4:51 PM Miquel Raynal <miquel.raynal at bootlin.com> wrote:
> geert at linux-m68k.org wrote on Fri, 17 Dec 2021 16:44:59 +0100:
> > On Fri, Dec 17, 2021 at 3:20 PM Miquel Raynal <miquel.raynal at bootlin.com> wrote:
> > > Add a Yaml description for this Renesas NAND controller.
> > >
> > > As this controller is embedded on different SoC families, provide:
> > > * a family-specific "r-car-gen3" compatible and a more specific
> > >   "r8a77951" one
> > > * a family-specific "rzn1" compatible and a more specific "r9a06g032"
> > >   one
> > >
> > > More compatibles can be added later if new SoCs with this controller
> > > must be supported.
> > >
> > > Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> > > Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
> > > Reviewed-by: Rob Herring <robh at kernel.org>
> >
> > Thanks for the update!
> >
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
> > > @@ -0,0 +1,66 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/mtd/renesas-nandc.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Renesas R-Car Gen3 & RZ/N1x NAND flash controller device tree bindings
> > > +
> > > +maintainers:
> > > +  - Miquel Raynal <miquel.raynal at bootlin.com>
> > > +
> > > +allOf:
> > > +  - $ref: "nand-controller.yaml"
> > > +
> > > +properties:
> > > +  compatible:
> > > +    oneOf:
> > > +      - items:
> > > +          - enum:
> > > +              - renesas,r8a77951-nandc
> > > +          - const: renesas,rcar-gen3-nandc
> >
> > Might be a bit premature to add these before they have been tested,
> > and because there are small differences in integration, cfr. below.
> >
> > > +
> > > +      - items:
> > > +          - enum:
> > > +              - renesas,r9a06g032-nandc
> > > +          - const: renesas,rzn1-nandc
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: APB host controller clock
> > > +      - description: External NAND bus clock
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: hclk
> > > +      - const: eclk
> >
> > On R-Car Gen3, there's a single module clock.
> > Plus a power-domain to manage that.
> >
> > Actually the RZ/N1 clock driver also registers a PM Domain, so letting
> > Runtime PM manage the clocks may work on RZ/N1, too...
> >
> > On R-Car Gen3, there's also a module reset.
>
> Ok, I didn't know. I propose to drop the r-car-gen3 compatible entirely
> from the driver and the binding when I'll apply the series. Is it fine
> for you?

Yes, that's fine for me. Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds