[PATCH V2] mtd: spi-nor: winbond: Add support for winbond chip

[Sajida Bhanu (Temp)]

Hi ,

Thanks for the review.

Sure, Will make the change.

Thanks,
Sajida

-----Original Message-----
From: Doug Anderson <dianders at chromium.org> 
Sent: Monday, December 13, 2021 9:22 PM
To: Sajida Bhanu (Temp) (QUIC) <quic_c_sbhanu at quicinc.com>
Cc: tudor.ambarus at microchip.com; michael at walle.cc; p.yadav at ti.com; miquel.raynal at bootlin.com; richard at nod.at; vigneshr at ti.com; linux-mtd at lists.infradead.org; linux-kernel at vger.kernel.org; stummala at codeaurora.org; vbadigan at codeaurora.org; Ram Prakash Gupta (QUIC) <quic_rampraka at quicinc.com>; Pradeep Pragallapati (QUIC) <quic_pragalla at quicinc.com>; sartgarg at codeaurora.org
Subject: Re: [PATCH V2] mtd: spi-nor: winbond: Add support for winbond chip

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi,

On Wed, Dec 1, 2021 at 10:38 PM Shaik Sajida Bhanu <quic_c_sbhanu at quicinc.com> wrote:
>
> Add support for winbond W25Q512NW-IM chip.
>
> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu at quicinc.com>
> ---
> Changes since V1:
>         Added space before name of the flash part as suggested by Doug.

When someone comments on V1, it's nice to CC them on V2. ;-)

> ---
>  drivers/mtd/spi-nor/winbond.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/winbond.c 
> b/drivers/mtd/spi-nor/winbond.c index 96573f6..44f19f2 100644
> --- a/drivers/mtd/spi-nor/winbond.c
> +++ b/drivers/mtd/spi-nor/winbond.c
> @@ -100,6 +100,9 @@ static const struct flash_info winbond_parts[] = {
>                              SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>         { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
>                             SECT_4K | SPI_NOR_QUAD_READ | 
> SPI_NOR_DUAL_READ) },
> +       { "w25q512nw", INFO(0xef8020, 0, 64 * 1024, 1024,
> +                          SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> +                          SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },

I had a quick look. Though I'm no expert on this driver, I believe that the name should be "w25q512nwm", not "w25q512nw" (you need an "m"
at the end). Evidence:

The Winbond doc [1] shows:

W25Q512NW-IM is 0xef8020
W25Q512NW-IQ/IN is 0xef6020

Comparing to a different datasheet [2], I see that:

W25Q256JW-IM is 0xef8019
W25Q256JW is 0xef6019

Since "W25Q256JW-IM" is in code as "w25q256jwm" it implies to me that for the "-IM" suffix you just add a "m" to the end of the name.

[1] https://www.winbond.com/resource-files/W25Q512NW%20RevB%2007192021.pdf
[2] https://www.winbond.com/resource-files/W25Q256JW%20SPI%20RevJ%2003102021%20Plus.pdf

After changing the name, feel free to add my Reviewed-by (and please CC me on v3).

-Doug