[PATCH v5 02/14] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls
Tudor Ambarus
tudor.ambarus at microchip.com
Fri Dec 3 06:22:44 PST 2021
Use NOR parameters in the probe's sequence of calls, thus
nor->params->size instead of nor->mtd.size and let the mtd_info
fields be used by the mtd calls (mtd->_erase, mtd->_read, mtd->_write).
mtd_info fields should not be used during probe because we haven't
registered mtd yet. It's safe to drop xilinx's setting of nor->mtd.size,
now that we use nor->params->size in spi_nor_set_addr_width().
Fixes: 641edddb4f43 ("mtd: spi-nor: Add s3an_post_sfdp_fixups()")
Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
Reviewed-by: Michael Walle <michael at walle.cc>
---
drivers/mtd/spi-nor/core.c | 8 ++++----
drivers/mtd/spi-nor/xilinx.c | 1 -
2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 88dd0908d172..5b9c827d411c 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2115,7 +2115,7 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
*/
op->addr.nbytes = 4;
if (!spi_mem_supports_op(nor->spimem, op)) {
- if (nor->mtd.size > SZ_16M)
+ if (nor->params->size > SZ_16M)
return -EOPNOTSUPP;
/* If flash size <= 16MB, 3 address bytes are sufficient */
@@ -3011,7 +3011,7 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
nor->addr_width = 3;
}
- if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
+ if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
}
@@ -3245,7 +3245,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
SPI_MEM_OP_DATA_IN(0, NULL, 0)),
.offset = 0,
- .length = nor->mtd.size,
+ .length = nor->params->size,
};
struct spi_mem_op *op = &info.op_tmpl;
@@ -3276,7 +3276,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
.offset = 0,
- .length = nor->mtd.size,
+ .length = nor->params->size,
};
struct spi_mem_op *op = &info.op_tmpl;
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 03d3b006a039..580562bc1e45 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -70,7 +70,6 @@ static int xilinx_nor_setup(struct spi_nor *nor,
nor->params->page_size = page_size;
nor->mtd.writebufsize = page_size;
nor->params->size = 8 * page_size * nor->info->n_sectors;
- nor->mtd.size = nor->params->size;
nor->mtd.erasesize = 8 * page_size;
} else {
/* Flash in Default addressing mode */
--
2.25.1
More information about the linux-mtd
mailing list