[PATCH] mtd: spi-nor: micron-st: added support for np8p128ax60

Michael Walle michael at walle.cc
Tue Aug 31 01:39:27 PDT 2021


Hi Andrea,

Am 2021-08-31 10:13, schrieb Andrea Zanotti:
> From: Andrea Zanotti <andreazanottifo at gmail.com>
> 
> Added support for P8P Parallel Phase Change Memory.

Please use present tense, eg "add support..."

Is there a public datasheet? If so, please include it above
your SoB like so:
Datasheet: https://...

> Added memory information (page size and sector size) as per data-
> sheet information, after typos corrections.

After typos corrections?

> At page 37, paragraph 'SPI Memory Organization', it is written
> down that the memory is organized as:
>  * 16.772.216 bytes (typo here, there 16.777.216 bytes)
>  * 128 sectors of 128 Kbytes each (correct)
>  * 131.072 pages of 64 bytes each (typo here, as the total would be
>    64Mbit, but the total memory is actually 128Mbit, correct value
>    is 262.144 pages)
> 
> Patch tested against the aforementioned PCM memory.

What SPI host controller was used?

> No known regressions inserted, as the patch only adds the possibility
> to recognize said PCM memory inside the common spi-nor driver.

Please drop this. If there were any regressions, the patch wouldn't
be picked up anyway.

> 
> Signed-off-by: Andrea Zanotti <andreazanottifo at gmail.com>
> ---
>  drivers/mtd/spi-nor/micron-st.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mtd/spi-nor/micron-st.c 
> b/drivers/mtd/spi-nor/micron-st.c
> index c224e59820a1..c78331451082 100644
> --- a/drivers/mtd/spi-nor/micron-st.c
> +++ b/drivers/mtd/spi-nor/micron-st.c
> @@ -128,6 +128,7 @@ static const struct flash_info micron_parts[] = {
>  	{ "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
>  			    SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
>  			    SPI_NOR_4B_OPCODES) },
> +	{ "np8p128ax60", {0x89, 0xda, 0x18}, 3, 128 * 1024, 128, 64, 0, 0 },

Eh? Please use INFO(). And why isn't this 0x20 for micron.

I found this datasheet:
https://media.digikey.com/pdf/Data%20Sheets/Micron%20Technology%20Inc%20PDFs/NP8P128Ax60E_Rev_K.pdf

According to that datasheet, the manuf id is 0x20. And the device id
should be either 0x88e1 or 0x8821.

>  };
> 
>  static const struct flash_info st_parts[] = {

-- 
-michael



More information about the linux-mtd mailing list