[PATCH v8 20/34] mmc: sdhci-tegra: Add runtime PM and OPP support
Dmitry Osipenko
digetx at gmail.com
Wed Aug 25 02:45:01 PDT 2021
20.08.2021 14:35, Thierry Reding пишет:
> On Fri, Aug 20, 2021 at 01:37:13AM +0300, Dmitry Osipenko wrote:
>> 19.08.2021 20:03, Thierry Reding пишет:
>>> On Tue, Aug 17, 2021 at 04:27:40AM +0300, Dmitry Osipenko wrote:
>>>> The SDHCI on Tegra belongs to the core power domain and we're going to
>>>> enable GENPD support for the core domain. Now SDHCI must be resumed using
>>>> runtime PM API in order to initialize the SDHCI power state. The SDHCI
>>>> clock rate must be changed using OPP API that will reconfigure the power
>>>> domain performance state in accordance to the rate. Add runtime PM and OPP
>>>> support to the SDHCI driver.
>>>>
>>>> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
>>>> ---
>>>> drivers/mmc/host/sdhci-tegra.c | 146 ++++++++++++++++++++++++---------
>>>> 1 file changed, 105 insertions(+), 41 deletions(-)
>>>>
>>>> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
>>>> index 387ce9cdbd7c..a3583359c972 100644
>>>> --- a/drivers/mmc/host/sdhci-tegra.c
>>>> +++ b/drivers/mmc/host/sdhci-tegra.c
>>>> @@ -15,6 +15,8 @@
>>>> #include <linux/of.h>
>>>> #include <linux/of_device.h>
>>>> #include <linux/pinctrl/consumer.h>
>>>> +#include <linux/pm_opp.h>
>>>> +#include <linux/pm_runtime.h>
>>>> #include <linux/regulator/consumer.h>
>>>> #include <linux/reset.h>
>>>> #include <linux/mmc/card.h>
>>>> @@ -24,6 +26,8 @@
>>>> #include <linux/gpio/consumer.h>
>>>> #include <linux/ktime.h>
>>>>
>>>> +#include <soc/tegra/common.h>
>>>> +
>>>> #include "sdhci-pltfm.h"
>>>> #include "cqhci.h"
>>>>
>>>> @@ -123,6 +127,12 @@
>>>> SDHCI_TRNS_BLK_CNT_EN | \
>>>> SDHCI_TRNS_DMA)
>>>>
>>>> +enum {
>>>> + TEGRA_CLK_BULK_SDHCI,
>>>> + TEGRA_CLK_BULK_TMCLK,
>>>> + TEGRA_CLK_BULK_NUM,
>>>> +};
>>>> +
>>>> struct sdhci_tegra_soc_data {
>>>> const struct sdhci_pltfm_data *pdata;
>>>> u64 dma_mask;
>>>> @@ -171,6 +181,8 @@ struct sdhci_tegra {
>>>> bool enable_hwcq;
>>>> unsigned long curr_clk_rate;
>>>> u8 tuned_tap_delay;
>>>> +
>>>> + struct clk_bulk_data clocks[TEGRA_CLK_BULK_NUM];
>>>
>>> This doesn't seem worth it to me. There's a lot of churn in this driver
>>> that's only needed to convert this to the clk_bulk API and it makes the
>>> code a lot more difficult to read, in my opinion.
>>>
>>> It looks like the only benefit that this gives us is that runtime
>>> suspend and resume become a few lines shorter.
>>
>> The driver probe code looks cleaner with that. You should be looking at
>> the final result and not at the patch to see it.
>
> I did look at the final result and didn't find it cleaner at all. =)
There is UAF bug in this patch that was spotted by kasan. The
sdhci_tegra_soc_data isn't resource-managed, but clk_bulk_data is. I'm
now thinking that it should be okay to keep tmclk always-on, so I'll
replace the bulk clks back with the sdhci clk in v9.
More information about the linux-mtd
mailing list