[PATCH v8 13/34] drm/tegra: hdmi: Add OPP support

[Dmitry Osipenko]

The HDMI on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now HDMI driver must use
OPP API for driving the controller's clock rate because OPP API takes
care of reconfiguring the domain's performance state based on HDMI clock
rate. Add OPP support to the HDMI driver.

Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
---
 drivers/gpu/drm/tegra/hdmi.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c
index e5d2a4026028..aa13028480f7 100644
--- a/drivers/gpu/drm/tegra/hdmi.c
+++ b/drivers/gpu/drm/tegra/hdmi.c
@@ -11,10 +11,13 @@
 #include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
+#include <soc/tegra/common.h>
+
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_debugfs.h>
@@ -1195,7 +1198,7 @@ static void tegra_hdmi_encoder_enable(struct drm_encoder *encoder)
 	h_back_porch = mode->htotal - mode->hsync_end;
 	h_front_porch = mode->hsync_start - mode->hdisplay;
 
-	err = clk_set_rate(hdmi->clk, hdmi->pixel_clock);
+	err = dev_pm_opp_set_rate(hdmi->dev, hdmi->pixel_clock);
 	if (err < 0) {
 		dev_err(hdmi->dev, "failed to set HDMI clock frequency: %d\n",
 			err);
@@ -1516,6 +1519,12 @@ static int tegra_hdmi_runtime_resume(struct host1x_client *client)
 		return err;
 	}
 
+	err = dev_pm_opp_sync(dev);
+	if (err) {
+		dev_err(dev, "failed to sync OPP: %d\n", err);
+		goto put_rpm;
+	}
+
 	err = clk_prepare_enable(hdmi->clk);
 	if (err < 0) {
 		dev_err(dev, "failed to enable clock: %d\n", err);
@@ -1708,6 +1717,10 @@ static int tegra_hdmi_probe(struct platform_device *pdev)
 
 	hdmi->output.dev = &pdev->dev;
 
+	err = devm_tegra_core_dev_init_opp_table_simple(&pdev->dev);
+	if (err)
+		return err;
+
 	err = tegra_output_probe(&hdmi->output);
 	if (err < 0)
 		return err;
-- 
2.32.0