[PATCH] mtd: rawnand: mxic: Enable and prepare clocks in probe

Miquel Raynal miquel.raynal at bootlin.com
Mon Aug 16 01:01:14 PDT 2021


Hi Andy,

Andy Shevchenko <andy.shevchenko at gmail.com> wrote on Thu, 12 Aug 2021
15:13:10 +0300:

> On Thursday, August 12, 2021, Evgeny Novikov <novikov at ispras.ru> wrote:
> 
> > It seems that mxic_nfc_probe() missed invocation of
> > mxic_nfc_clk_enable(). The patch fixed that. In addition, error handling
> > was refined appropriately.  
> 
> 
> NAK. Until you provide a deeper analysis, like how this works before your
> change.
> 
> 
> Please, don’t blindly generate patches, this can even your bot do, just
> think about each change and preferable test on the real hardware.
> 
> The above is to all your lovely contributions.
> 
> 
> >
> > Found by Linux Driver Verification project (linuxtesting.org).
> >
> > Signed-off-by: Evgeny Novikov <novikov at ispras.ru>
> > Co-developed-by: Kirill Shilimanov <kirill.shilimanov at huawei.com>
> > Signed-off-by: Kirill Shilimanov <kirill.shilimanov at huawei.com>
> > ---
> >  drivers/mtd/nand/raw/mxic_nand.c | 16 ++++++++++++----
> >  1 file changed, 12 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/mtd/nand/raw/mxic_nand.c b/drivers/mtd/nand/raw/mxic_
> > nand.c
> > index da1070993994..37e75bf60ee5 100644
> > --- a/drivers/mtd/nand/raw/mxic_nand.c
> > +++ b/drivers/mtd/nand/raw/mxic_nand.c
> > @@ -509,9 +509,15 @@ static int mxic_nfc_probe(struct platform_device
> > *pdev)
> >         if (IS_ERR(nfc->send_dly_clk))
> >                 return PTR_ERR(nfc->send_dly_clk);
> >
> > +       err = mxic_nfc_clk_enable(nfc);
> > +       if (err)
> > +               return err;

As Andy said, this is not needed.

> > +
> >         nfc->regs = devm_platform_ioremap_resource(pdev, 0);
> > -       if (IS_ERR(nfc->regs))
> > -               return PTR_ERR(nfc->regs);
> > +       if (IS_ERR(nfc->regs)) {
> > +               err = PTR_ERR(nfc->regs);
> > +               goto fail;
> > +       }
> >
> >         nand_chip = &nfc->chip;
> >         mtd = nand_to_mtd(nand_chip);
> > @@ -527,8 +533,10 @@ static int mxic_nfc_probe(struct platform_device
> > *pdev)
> >         nand_chip->controller = &nfc->controller;
> >
> >         irq = platform_get_irq(pdev, 0);
> > -       if (irq < 0)
> > -               return irq;
> > +       if (irq < 0) {
> > +               err = irq;
> > +               goto fail;

However some reworking is needed in the error path.

That goto statement should be renamed and devm_request_irq() should not
jump to it.

> > +       }
> >
> >         mxic_nfc_hw_init(nfc);
> >
> > --
> > 2.26.2
> >
> >  
> 

Thanks,
Miquèl



More information about the linux-mtd mailing list