imx27: No space left to write bad block table

[Fabio Estevam]

Hi,

I noticed this error recently on a imx27-phytec-phycard-s-rdk reported
on kernelci:

nand: device found, Manufacturer ID: 0x20, Chip ID: 0xa1
nand: ST Micro NAND01GR3B2CZA6
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table not found for chip 0
Bad block table not found for chip 0
Scanning device for bad blocks
random: fast init done
Bad eraseblock 329 at 0x000002920000
Bad eraseblock 330 at 0x000002940000
Bad eraseblock 331 at 0x000002960000
Bad eraseblock 332 at 0x000002980000
Bad eraseblock 333 at 0x0000029a0000
Bad eraseblock 334 at 0x0000029c0000
Bad eraseblock 335 at 0x0000029e0000
Bad eraseblock 336 at 0x000002a00000
Bad eraseblock 337 at 0x000002a20000
Bad eraseblock 338 at 0x000002a40000
Bad eraseblock 339 at 0x000002a60000
Bad eraseblock 340 at 0x000002a80000
Bad eraseblock 341 at 0x000002aa0000
Bad eraseblock 342 at 0x000002ac0000
Bad eraseblock 343 at 0x000002ae0000
Bad eraseblock 344 at 0x000002b00000
Bad eraseblock 345 at 0x000002b20000
Bad eraseblock 1020 at 0x000007f80000
Bad eraseblock 1021 at 0x000007fa0000
Bad eraseblock 1022 at 0x000007fc0000
Bad eraseblock 1023 at 0x000007fe0000
No space left to write bad block table
nand_bbt: error while writing bad block table -28
mxc_nand: probe of d8000000.nand-controller failed with error -28

Full log:
https://storage.kernelci.org/next/master/next-20210416/arm/imx_v4_v5_defconfig/gcc-8/lab-pengutronix/baseline-imx27-phytec-phycard-s-rdk.html

I don't have access to this board but just wanted to report it.

Regards,

Fabio Estevam