[RFC PATCH 08/16] mtd: rawnand: Add NV-DDR timings
Miquel Raynal
miquel.raynal at bootlin.com
Fri Apr 2 10:51:37 BST 2021
Create the relevant ONFI NV-DDR timings structure and fill it with
default values from the ONFI specification.
Add the relevant structure entries and helpers.
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
drivers/mtd/nand/raw/nand_timings.c | 255 ++++++++++++++++++++++++++++
include/linux/mtd/rawnand.h | 112 ++++++++++++
2 files changed, 367 insertions(+)
diff --git a/drivers/mtd/nand/raw/nand_timings.c b/drivers/mtd/nand/raw/nand_timings.c
index 94d832646487..481b56d5f60d 100644
--- a/drivers/mtd/nand/raw/nand_timings.c
+++ b/drivers/mtd/nand/raw/nand_timings.c
@@ -292,6 +292,261 @@ static const struct nand_interface_config onfi_sdr_timings[] = {
},
};
+static const struct nand_interface_config onfi_nvddr_timings[] = {
+ /* Mode 0 */
+ {
+ .type = NAND_NVDDR_IFACE,
+ .timings.mode = 0,
+ .timings.nvddr = {
+ .tCCS_min = 500000,
+ .tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tAC_min = 3000,
+ .tAC_max = 25000,
+ .tADL_min = 400000,
+ .tCAD_min = 45000,
+ .tCAH_min = 10000,
+ .tCALH_min = 10000,
+ .tCALS_min = 10000,
+ .tCAS_min = 10000,
+ .tCEH_min = 20000,
+ .tCH_min = 10000,
+ .tCK_min = 50000,
+ .tCS_min = 35000,
+ .tDH_min = 5000,
+ .tDQSCK_min = 3000,
+ .tDQSCK_max = 25000,
+ .tDQSD_min = 0,
+ .tDQSD_max = 18000,
+ .tDQSHZ_max = 20000,
+ .tDQSQ_max = 5000,
+ .tDS_min = 5000,
+ .tDSC_min = 50000,
+ .tFEAT_max = 1000000,
+ .tITC_max = 1000000,
+ .tQHS_max = 6000,
+ .tRHW_min = 100000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWHR_min = 80000,
+ .tWRCK_min = 20000,
+ .tWW_min = 100000,
+ },
+ },
+ /* Mode 1 */
+ {
+ .type = NAND_NVDDR_IFACE,
+ .timings.mode = 1,
+ .timings.nvddr = {
+ .tCCS_min = 500000,
+ .tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tAC_min = 3000,
+ .tAC_max = 25000,
+ .tADL_min = 400000,
+ .tCAD_min = 45000,
+ .tCAH_min = 5000,
+ .tCALH_min = 5000,
+ .tCALS_min = 5000,
+ .tCAS_min = 5000,
+ .tCEH_min = 20000,
+ .tCH_min = 5000,
+ .tCK_min = 30000,
+ .tCS_min = 25000,
+ .tDH_min = 2500,
+ .tDQSCK_min = 3000,
+ .tDQSCK_max = 25000,
+ .tDQSD_min = 0,
+ .tDQSD_max = 18000,
+ .tDQSHZ_max = 20000,
+ .tDQSQ_max = 2500,
+ .tDS_min = 3000,
+ .tDSC_min = 30000,
+ .tFEAT_max = 1000000,
+ .tITC_max = 1000000,
+ .tQHS_max = 3000,
+ .tRHW_min = 100000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWHR_min = 80000,
+ .tWRCK_min = 20000,
+ .tWW_min = 100000,
+ },
+ },
+ /* Mode 2 */
+ {
+ .type = NAND_NVDDR_IFACE,
+ .timings.mode = 2,
+ .timings.nvddr = {
+ .tCCS_min = 500000,
+ .tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tAC_min = 3000,
+ .tAC_max = 25000,
+ .tADL_min = 400000,
+ .tCAD_min = 45000,
+ .tCAH_min = 4000,
+ .tCALH_min = 4000,
+ .tCALS_min = 4000,
+ .tCAS_min = 4000,
+ .tCEH_min = 20000,
+ .tCH_min = 4000,
+ .tCK_min = 20000,
+ .tCS_min = 15000,
+ .tDH_min = 1700,
+ .tDQSCK_min = 3000,
+ .tDQSCK_max = 25000,
+ .tDQSD_min = 0,
+ .tDQSD_max = 18000,
+ .tDQSHZ_max = 20000,
+ .tDQSQ_max = 1700,
+ .tDS_min = 2000,
+ .tDSC_min = 20000,
+ .tFEAT_max = 1000000,
+ .tITC_max = 1000000,
+ .tQHS_max = 2000,
+ .tRHW_min = 100000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWHR_min = 80000,
+ .tWRCK_min = 20000,
+ .tWW_min = 100000,
+ },
+ },
+ /* Mode 3 */
+ {
+ .type = NAND_NVDDR_IFACE,
+ .timings.mode = 3,
+ .timings.nvddr = {
+ .tCCS_min = 500000,
+ .tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tAC_min = 3000,
+ .tAC_max = 25000,
+ .tADL_min = 400000,
+ .tCAD_min = 45000,
+ .tCAH_min = 3000,
+ .tCALH_min = 3000,
+ .tCALS_min = 3000,
+ .tCAS_min = 3000,
+ .tCEH_min = 20000,
+ .tCH_min = 3000,
+ .tCK_min = 15000,
+ .tCS_min = 15000,
+ .tDH_min = 1300,
+ .tDQSCK_min = 3000,
+ .tDQSCK_max = 25000,
+ .tDQSD_min = 0,
+ .tDQSD_max = 18000,
+ .tDQSHZ_max = 20000,
+ .tDQSQ_max = 1300,
+ .tDS_min = 1500,
+ .tDSC_min = 15000,
+ .tFEAT_max = 1000000,
+ .tITC_max = 1000000,
+ .tQHS_max = 1500,
+ .tRHW_min = 100000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWHR_min = 80000,
+ .tWRCK_min = 20000,
+ .tWW_min = 100000,
+ },
+ },
+ /* Mode 4 */
+ {
+ .type = NAND_NVDDR_IFACE,
+ .timings.mode = 4,
+ .timings.nvddr = {
+ .tCCS_min = 500000,
+ .tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tAC_min = 3000,
+ .tAC_max = 25000,
+ .tADL_min = 400000,
+ .tCAD_min = 45000,
+ .tCAH_min = 2500,
+ .tCALH_min = 2500,
+ .tCALS_min = 2500,
+ .tCAS_min = 2500,
+ .tCEH_min = 20000,
+ .tCH_min = 2500,
+ .tCK_min = 12000,
+ .tCS_min = 15000,
+ .tDH_min = 1100,
+ .tDQSCK_min = 3000,
+ .tDQSCK_max = 25000,
+ .tDQSD_min = 0,
+ .tDQSD_max = 18000,
+ .tDQSHZ_max = 20000,
+ .tDQSQ_max = 1000,
+ .tDS_min = 1100,
+ .tDSC_min = 12000,
+ .tFEAT_max = 1000000,
+ .tITC_max = 1000000,
+ .tQHS_max = 1200,
+ .tRHW_min = 100000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWHR_min = 80000,
+ .tWRCK_min = 20000,
+ .tWW_min = 100000,
+ },
+ },
+ /* Mode 5 */
+ {
+ .type = NAND_NVDDR_IFACE,
+ .timings.mode = 5,
+ .timings.nvddr = {
+ .tCCS_min = 500000,
+ .tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tAC_min = 3000,
+ .tAC_max = 25000,
+ .tADL_min = 400000,
+ .tCAD_min = 45000,
+ .tCAH_min = 2000,
+ .tCALH_min = 2000,
+ .tCALS_min = 2000,
+ .tCAS_min = 2000,
+ .tCEH_min = 20000,
+ .tCH_min = 2000,
+ .tCK_min = 10000,
+ .tCS_min = 15000,
+ .tDH_min = 900,
+ .tDQSCK_min = 3000,
+ .tDQSCK_max = 25000,
+ .tDQSD_min = 0,
+ .tDQSD_max = 18000,
+ .tDQSHZ_max = 20000,
+ .tDQSQ_max = 850,
+ .tDS_min = 900,
+ .tDSC_min = 10000,
+ .tFEAT_max = 1000000,
+ .tITC_max = 1000000,
+ .tQHS_max = 1000,
+ .tRHW_min = 100000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWHR_min = 80000,
+ .tWRCK_min = 20000,
+ .tWW_min = 100000,
+ },
+ },
+};
+
/* All NAND chips share the same reset data interface: SDR mode 0 */
const struct nand_interface_config *nand_get_reset_interface_config(void)
{
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index e9512ac3ff5a..a21cb3259a2a 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -471,12 +471,100 @@ struct nand_sdr_timings {
u32 tWW_min;
};
+/**
+ * struct nand_nvddr_timings - NV-DDR NAND chip timings
+ *
+ * This struct defines the timing requirements of a NV-DDR NAND data interface.
+ * These information can be found in every NAND datasheets and the timings
+ * meaning are described in the ONFI specifications:
+ * https://media-www.micron.com/-/media/client/onfi/specs/onfi_4_1_gold.pdf
+ * (chapter 4.18.2 NV-DDR)
+ *
+ * All these timings are expressed in picoseconds.
+ *
+ * @tBERS_max: Block erase time
+ * @tCCS_min: Change column setup time
+ * @tPROG_max: Page program time
+ * @tR_max: Page read time
+ * @tAC_min: Access window of DQ[7:0] from CLK
+ * @tAC_max: Access window of DQ[7:0] from CLK
+ * @tADL_min: ALE to data loading time
+ * @tCAD_min: Command, Address, Data delay
+ * @tCAH_min: Command/Address DQ hold time
+ * @tCALH_min: W/R_n, CLE and ALE hold time
+ * @tCALS_min: W/R_n, CLE and ALE setup time
+ * @tCAS_min: Command/address DQ setup time
+ * @tCEH_min: CE# high hold time
+ * @tCH_min: CE# hold time
+ * @tCK_min: Average clock cycle time
+ * @tCS_min: CE# setup time
+ * @tDH_min: Data hold time
+ * @tDQSCK_min: Start of the access window of DQS from CLK
+ * @tDQSCK_max: End of the access window of DQS from CLK
+ * @tDQSD_min: Min W/R_n low to DQS/DQ driven by device
+ * @tDQSD_max: Max W/R_n low to DQS/DQ driven by device
+ * @tDQSHZ_max: W/R_n high to DQS/DQ tri-state by device
+ * @tDQSQ_max: DQS-DQ skew, DQS to last DQ valid, per access
+ * @tDS_min: Data setup time
+ * @tDSC_min: DQS cycle time
+ * @tFEAT_max: Busy time for Set Features and Get Features
+ * @tITC_max: Interface and Timing Mode Change time
+ * @tQHS_max: Data hold skew factor
+ * @tRHW_min: Data output cycle to command, address, or data input cycle
+ * @tRR_min: Ready to RE# low (data only)
+ * @tRST_max: Device reset time, measured from the falling edge of R/B# to the
+ * rising edge of R/B#.
+ * @tWB_max: WE# high to SR[6] low
+ * @tWHR_min: WE# high to RE# low
+ * @tWRCK_min: W/R_n low to data output cycle
+ * @tWW_min: WP# transition to WE# low
+ */
+struct nand_nvddr_timings {
+ u64 tBERS_max;
+ u32 tCCS_min;
+ u64 tPROG_max;
+ u64 tR_max;
+ u32 tAC_min;
+ u32 tAC_max;
+ u32 tADL_min;
+ u32 tCAD_min;
+ u32 tCAH_min;
+ u32 tCALH_min;
+ u32 tCALS_min;
+ u32 tCAS_min;
+ u32 tCEH_min;
+ u32 tCH_min;
+ u32 tCK_min;
+ u32 tCS_min;
+ u32 tDH_min;
+ u32 tDQSCK_min;
+ u32 tDQSCK_max;
+ u32 tDQSD_min;
+ u32 tDQSD_max;
+ u32 tDQSHZ_max;
+ u32 tDQSQ_max;
+ u32 tDS_min;
+ u32 tDSC_min;
+ u32 tFEAT_max;
+ u32 tITC_max;
+ u32 tQHS_max;
+ u32 tRHW_min;
+ u32 tRR_min;
+ u32 tRST_max;
+ u32 tWB_max;
+ u32 tWHR_min;
+ u32 tWRCK_min;
+ u32 tWW_min;
+};
+
/**
* enum nand_interface_type - NAND interface type
* @NAND_SDR_IFACE: Single Data Rate interface
+ * @NAND_NVDDR_IFACE: Double Data Rate interface
*/
enum nand_interface_type {
NAND_SDR_IFACE,
+ NAND_NVDDR_IFACE,
};
/**
@@ -485,6 +573,7 @@ enum nand_interface_type {
* @timings: The timing information
* @timings.mode: Timing mode as defined in the specification
* @timings.sdr: Use it when @type is %NAND_SDR_IFACE.
+ * @timings.nvddr: Use it when @type is %NAND_NVDDR_IFACE.
*/
struct nand_interface_config {
enum nand_interface_type type;
@@ -492,6 +581,7 @@ struct nand_interface_config {
unsigned int mode;
union {
struct nand_sdr_timings sdr;
+ struct nand_nvddr_timings nvddr;
};
} timings;
};
@@ -505,6 +595,15 @@ static bool nand_interface_is_sdr(const struct nand_interface_config *conf)
return conf->type == NAND_SDR_IFACE;
}
+/**
+ * nand_interface_is_nvddr - get the interface type
+ * @conf: The data interface
+ */
+static bool nand_interface_is_nvddr(const struct nand_interface_config *conf)
+{
+ return conf->type == NAND_NVDDR_IFACE;
+}
+
/**
* nand_get_sdr_timings - get SDR timing from data interface
* @conf: The data interface
@@ -518,6 +617,19 @@ nand_get_sdr_timings(const struct nand_interface_config *conf)
return &conf->timings.sdr;
}
+/**
+ * nand_get_nvddr_timings - get NV-DDR timing from data interface
+ * @conf: The data interface
+ */
+static inline const struct nand_nvddr_timings *
+nand_get_nvddr_timings(const struct nand_interface_config *conf)
+{
+ if (!nand_interface_is_nvddr(conf))
+ return ERR_PTR(-EINVAL);
+
+ return &conf->timings.nvddr;
+}
+
/**
* struct nand_op_cmd_instr - Definition of a command instruction
* @opcode: the command to issue in one cycle
--
2.27.0
More information about the linux-mtd
mailing list