[PATCH] mtd: spi-nor: gigadevice: add GD25LQ80C

[Stijn Tintel]

On 25/09/2020 14:36, Vignesh Raghavendra wrote:
> Hi,
>
> On 9/22/20 12:17 AM, Stijn Tintel wrote:
>> Tested on a TP-Link OC200.
>>
> But what was tested? Dual and quad mode tested (as you enable those
> flags)? And lock/unlock as well?
>
> Could you add this info to commit message?
I tested read and write with dd, verified the written image afterwards.
I enabled those flags based on what's in the datasheet. If this is not
enough, please advise an acceptable way to test those flags.
>
>> Datasheet: https://www.gigadevice.com/datasheet/gd25lq80c/
>>
>> Signed-off-by: Stijn Tintel <stijn at linux-ipv6.be>
>> ---
>>  drivers/mtd/spi-nor/gigadevice.c | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
>> index 447d84bb2128..840fa9f90a67 100644
>> --- a/drivers/mtd/spi-nor/gigadevice.c
>> +++ b/drivers/mtd/spi-nor/gigadevice.c
>> @@ -24,6 +24,9 @@ static struct spi_nor_fixups gd25q256_fixups = {
>>  };
>>  
>>  static const struct flash_info gigadevice_parts[] = {
>> +	{ "gd25lq80c", INFO(0xc86014, 0, 64 * 1024, 16,
>> +			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
>> +			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
>>  	{ "gd25q16", INFO(0xc84015, 0, 64 * 1024,  32,
>>  			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
>>  			  SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
>>
> Regards
> Vignesh

Thanks,
Stijn