[PATCH 2/4] spi: hisi-sfc-v3xx: factor out bus config and transfer functions

Yicong Yang yangyicong at hisilicon.com
Thu Sep 24 08:24:28 EDT 2020


In hisi_sfc_v3xx_generic_exec_op(), we will write the data to the buffer,
configure and start the transfer, read the data to the buffer and check
whether occurs an error. Factor out the config and transfer start codes
as individual functions, to make the process a bit clearer.

Acked-by: John Garry <john.garry at huawei.com>
Signed-off-by: Yicong Yang <yangyicong at hisilicon.com>
---
 drivers/spi/spi-hisi-sfc-v3xx.c | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c
index 69f5a7b..62d4ed8 100644
--- a/drivers/spi/spi-hisi-sfc-v3xx.c
+++ b/drivers/spi/spi-hisi-sfc-v3xx.c
@@ -198,12 +198,12 @@ static void hisi_sfc_v3xx_write_databuf(struct hisi_sfc_v3xx_host *host,
 	}
 }
 
-static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
-					 const struct spi_mem_op *op,
-					 u8 chip_select)
+static int hisi_sfc_v3xx_start_bus(struct hisi_sfc_v3xx_host *host,
+				   const struct spi_mem_op *op,
+				   u8 chip_select)
 {
-	int ret = 0, len = op->data.nbytes, buswidth_mode;
-	u32 int_stat, config = 0;
+	int len = op->data.nbytes, buswidth_mode;
+	u32 config = 0;
 
 	if (op->addr.nbytes)
 		config |= HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK;
@@ -227,9 +227,7 @@ static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
 		config |= HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK;
 	}
 
-	if (op->data.dir == SPI_MEM_DATA_OUT)
-		hisi_sfc_v3xx_write_databuf(host, op->data.buf.out, len);
-	else if (op->data.dir == SPI_MEM_DATA_IN)
+	if (op->data.dir == SPI_MEM_DATA_IN)
 		config |= HISI_SFC_V3XX_CMD_CFG_RW_MSK;
 
 	config |= op->dummy.nbytes << HISI_SFC_V3XX_CMD_CFG_DUMMY_CNT_OFF |
@@ -241,6 +239,23 @@ static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
 
 	writel(config, host->regbase + HISI_SFC_V3XX_CMD_CFG);
 
+	return 0;
+}
+
+static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
+					 const struct spi_mem_op *op,
+					 u8 chip_select)
+{
+	u32 int_stat;
+	int ret;
+
+	if (op->data.dir == SPI_MEM_DATA_OUT)
+		hisi_sfc_v3xx_write_databuf(host, op->data.buf.out, op->data.nbytes);
+
+	ret = hisi_sfc_v3xx_start_bus(host, op, chip_select);
+	if (ret)
+		return ret;
+
 	ret = hisi_sfc_v3xx_wait_cmd_idle(host);
 	if (ret)
 		return ret;
@@ -265,7 +280,7 @@ static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
 	}
 
 	if (op->data.dir == SPI_MEM_DATA_IN)
-		hisi_sfc_v3xx_read_databuf(host, op->data.buf.in, len);
+		hisi_sfc_v3xx_read_databuf(host, op->data.buf.in, op->data.nbytes);
 
 	return 0;
 }
-- 
2.8.1




More information about the linux-mtd mailing list