[PATCH v3 14/14] dt-bindings: clock: imx8m: Integrate duplicated i.MX 8M schemas
Krzysztof Kozlowski
krzk at kernel.org
Fri Sep 4 11:24:04 EDT 2020
The clock controller schemas for i.MX 8M Mini, 8M Nano, 8M Plus and 8M
Quad are basically the same. The only minor difference appears on 8M
Quad which needs one more clock.
There is no point to have four schemas for almost the same binding. Any
fixes or changes would have to be duplicated four times.
Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
.../bindings/clock/imx8m-clock.yaml | 125 ++++++++++++++++++
.../bindings/clock/imx8mm-clock.yaml | 68 ----------
.../bindings/clock/imx8mn-clock.yaml | 70 ----------
.../bindings/clock/imx8mp-clock.yaml | 70 ----------
.../bindings/clock/imx8mq-clock.yaml | 72 ----------
5 files changed, 125 insertions(+), 280 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/imx8m-clock.yaml
delete mode 100644 Documentation/devicetree/bindings/clock/imx8mm-clock.yaml
delete mode 100644 Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
delete mode 100644 Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
delete mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
new file mode 100644
index 000000000000..31e7cc9693c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8m-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Clock Control Module Binding
+
+maintainers:
+ - Anson Huang <Anson.Huang at nxp.com>
+
+description: |
+ NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock
+ controller, which generates and supplies to all modules.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8mm-ccm
+ - fsl,imx8mn-ccm
+ - fsl,imx8mp-ccm
+ - fsl,imx8mq-ccm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 6
+ maxItems: 7
+
+ clock-names:
+ minItems: 6
+ maxItems: 7
+
+ '#clock-cells':
+ const: 1
+ description:
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8m-clock.h
+ for the full list of i.MX8M clock IDs.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8mq-ccm
+ then:
+ properties:
+ clocks:
+ minItems: 7
+ maxItems: 7
+ items:
+ - description: 32k osc
+ - description: 25m osc
+ - description: 27m osc
+ - description: ext1 clock input
+ - description: ext2 clock input
+ - description: ext3 clock input
+ - description: ext4 clock input
+ clock-names:
+ minItems: 7
+ maxItems: 7
+ items:
+ - const: ckil
+ - const: osc_25m
+ - const: osc_27m
+ - const: clk_ext1
+ - const: clk_ext2
+ - const: clk_ext3
+ - const: clk_ext4
+ else:
+ properties:
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ext1 clock input
+ - description: ext2 clock input
+ - description: ext3 clock input
+ - description: ext4 clock input
+
+ clock-names:
+ items:
+ - const: osc_32k
+ - const: osc_24m
+ - const: clk_ext1
+ - const: clk_ext2
+ - const: clk_ext3
+ - const: clk_ext4
+
+unevaluatedProperties: false
+
+examples:
+ # Clock Control Module node:
+ - |
+ clock-controller at 30380000 {
+ compatible = "fsl,imx8mm-ccm";
+ reg = <0x30380000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+ <&clk_ext3>, <&clk_ext4>;
+ clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+ "clk_ext3", "clk_ext4";
+ };
+
+ - |
+ clock-controller at 30390000 {
+ compatible = "fsl,imx8mq-ccm";
+ reg = <0x30380000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc_25m>, <&osc_27m>, <&clk_ext1>,
+ <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
+ clock-names = "ckil", "osc_25m", "osc_27m", "clk_ext1",
+ "clk_ext2", "clk_ext3", "clk_ext4";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml
deleted file mode 100644
index ec830db1367b..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml
+++ /dev/null
@@ -1,68 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/imx8mm-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX8M Mini Clock Control Module Binding
-
-maintainers:
- - Anson Huang <Anson.Huang at nxp.com>
-
-description: |
- NXP i.MX8M Mini clock control module is an integrated clock controller, which
- generates and supplies to all modules.
-
-properties:
- compatible:
- const: fsl,imx8mm-ccm
-
- reg:
- maxItems: 1
-
- clocks:
- items:
- - description: 32k osc
- - description: 24m osc
- - description: ext1 clock input
- - description: ext2 clock input
- - description: ext3 clock input
- - description: ext4 clock input
-
- clock-names:
- items:
- - const: osc_32k
- - const: osc_24m
- - const: clk_ext1
- - const: clk_ext2
- - const: clk_ext3
- - const: clk_ext4
-
- '#clock-cells':
- const: 1
- description:
- The clock consumer should specify the desired clock by having the clock
- ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h
- for the full list of i.MX8M Mini clock IDs.
-
-required:
- - compatible
- - reg
- - clocks
- - clock-names
- - '#clock-cells'
-
-examples:
- # Clock Control Module node:
- - |
- clk: clock-controller at 30380000 {
- compatible = "fsl,imx8mm-ccm";
- reg = <0x30380000 0x10000>;
- #clock-cells = <1>;
- clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
- <&clk_ext3>, <&clk_ext4>;
- clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
- "clk_ext3", "clk_ext4";
- };
-
-...
diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
deleted file mode 100644
index bdaa29616ab1..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
+++ /dev/null
@@ -1,70 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/imx8mn-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX8M Nano Clock Control Module Binding
-
-maintainers:
- - Anson Huang <Anson.Huang at nxp.com>
-
-description: |
- NXP i.MX8M Nano clock control module is an integrated clock controller, which
- generates and supplies to all modules.
-
-properties:
- compatible:
- const: fsl,imx8mn-ccm
-
- reg:
- maxItems: 1
-
- clocks:
- items:
- - description: 32k osc
- - description: 24m osc
- - description: ext1 clock input
- - description: ext2 clock input
- - description: ext3 clock input
- - description: ext4 clock input
-
- clock-names:
- items:
- - const: osc_32k
- - const: osc_24m
- - const: clk_ext1
- - const: clk_ext2
- - const: clk_ext3
- - const: clk_ext4
-
- '#clock-cells':
- const: 1
- description:
- The clock consumer should specify the desired clock by having the clock
- ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h
- for the full list of i.MX8M Nano clock IDs.
-
-required:
- - compatible
- - reg
- - clocks
- - clock-names
- - '#clock-cells'
-
-additionalProperties: false
-
-examples:
- # Clock Control Module node:
- - |
- clk: clock-controller at 30380000 {
- compatible = "fsl,imx8mn-ccm";
- reg = <0x30380000 0x10000>;
- #clock-cells = <1>;
- clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
- <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
- clock-names = "osc_32k", "osc_24m", "clk_ext1",
- "clk_ext2", "clk_ext3", "clk_ext4";
- };
-
-...
diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
deleted file mode 100644
index 4351a1dbb4f7..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
+++ /dev/null
@@ -1,70 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/imx8mp-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX8M Plus Clock Control Module Binding
-
-maintainers:
- - Anson Huang <Anson.Huang at nxp.com>
-
-description:
- NXP i.MX8M Plus clock control module is an integrated clock controller, which
- generates and supplies to all modules.
-
-properties:
- compatible:
- const: fsl,imx8mp-ccm
-
- reg:
- maxItems: 1
-
- clocks:
- items:
- - description: 32k osc
- - description: 24m osc
- - description: ext1 clock input
- - description: ext2 clock input
- - description: ext3 clock input
- - description: ext4 clock input
-
- clock-names:
- items:
- - const: osc_32k
- - const: osc_24m
- - const: clk_ext1
- - const: clk_ext2
- - const: clk_ext3
- - const: clk_ext4
-
- '#clock-cells':
- const: 1
- description:
- The clock consumer should specify the desired clock by having the clock
- ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
- for the full list of i.MX8M Plus clock IDs.
-
-required:
- - compatible
- - reg
- - clocks
- - clock-names
- - '#clock-cells'
-
-additionalProperties: false
-
-examples:
- # Clock Control Module node:
- - |
- clk: clock-controller at 30380000 {
- compatible = "fsl,imx8mp-ccm";
- reg = <0x30380000 0x10000>;
- #clock-cells = <1>;
- clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
- <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
- clock-names = "osc_32k", "osc_24m", "clk_ext1",
- "clk_ext2", "clk_ext3", "clk_ext4";
- };
-
-...
diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
deleted file mode 100644
index 05d7d1471e0c..000000000000
--- a/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
+++ /dev/null
@@ -1,72 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/imx8mq-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX8M Quad Clock Control Module Binding
-
-maintainers:
- - Anson Huang <Anson.Huang at nxp.com>
-
-description: |
- NXP i.MX8M Quad clock control module is an integrated clock controller, which
- generates and supplies to all modules.
-
-properties:
- compatible:
- const: fsl,imx8mq-ccm
-
- reg:
- maxItems: 1
-
- clocks:
- items:
- - description: 32k osc
- - description: 25m osc
- - description: 27m osc
- - description: ext1 clock input
- - description: ext2 clock input
- - description: ext3 clock input
- - description: ext4 clock input
-
- clock-names:
- items:
- - const: ckil
- - const: osc_25m
- - const: osc_27m
- - const: clk_ext1
- - const: clk_ext2
- - const: clk_ext3
- - const: clk_ext4
-
- '#clock-cells':
- const: 1
- description:
- The clock consumer should specify the desired clock by having the clock
- ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h
- for the full list of i.MX8M Quad clock IDs.
-
-required:
- - compatible
- - reg
- - clocks
- - clock-names
- - '#clock-cells'
-
-examples:
- # Clock Control Module node:
- - |
- clk: clock-controller at 30380000 {
- compatible = "fsl,imx8mq-ccm";
- reg = <0x30380000 0x10000>;
- #clock-cells = <1>;
- clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
- <&clk_ext1>, <&clk_ext2>,
- <&clk_ext3>, <&clk_ext4>;
- clock-names = "ckil", "osc_25m", "osc_27m",
- "clk_ext1", "clk_ext2",
- "clk_ext3", "clk_ext4";
- };
-
-...
--
2.17.1
More information about the linux-mtd
mailing list