[PATCH] dt-bindings: More whitespace clean-ups in schema files
Rob Herring
robh at kernel.org
Fri Oct 23 15:22:58 EDT 2020
Clean-up incorrect indentation, extra spaces, and missing EOF newline in
schema files. Most of the clean-ups are for list indentation which
should always be 2 spaces more than the preceding keyword.
Found with yamllint (now integrated into the checks).
Cc: linux-arm-kernel at lists.infradead.org
Cc: dri-devel at lists.freedesktop.org
Cc: linux-gpio at vger.kernel.org
Cc: linux-i2c at vger.kernel.org
Cc: linux-iio at vger.kernel.org
Cc: linux-pm at vger.kernel.org
Cc: alsa-devel at alsa-project.org
Cc: linux-mmc at vger.kernel.org
Cc: linux-mtd at lists.infradead.org
Cc: linux-serial at vger.kernel.org
Cc: linux-usb at vger.kernel.org
Signed-off-by: Rob Herring <robh at kernel.org>
---
.../display/bridge/toshiba,tc358775.yaml | 18 ++--
.../display/panel/ilitek,ili9881c.yaml | 5 +-
.../devicetree/bindings/eeprom/at25.yaml | 6 +-
.../bindings/gpio/kontron,sl28cpld-gpio.yaml | 4 +-
.../devicetree/bindings/i2c/ingenic,i2c.yaml | 8 +-
.../bindings/iio/adc/adi,ad7291.yaml | 3 +-
.../bindings/iio/adc/adi,ad7768-1.yaml | 3 +-
.../bindings/iio/adc/cosmic,10001-adc.yaml | 4 +-
.../bindings/iio/adc/holt,hi8435.yaml | 2 +-
.../interrupt-controller/ti,pruss-intc.yaml | 12 +--
.../devicetree/bindings/mfd/ene-kb3930.yaml | 2 +-
.../devicetree/bindings/mmc/arasan,sdhci.yaml | 8 +-
.../devicetree/bindings/mmc/sdhci-am654.yaml | 15 ++-
.../pci/socionext,uniphier-pcie-ep.yaml | 18 ++--
.../phy/socionext,uniphier-ahci-phy.yaml | 6 +-
.../devicetree/bindings/phy/ti,omap-usb2.yaml | 20 ++--
.../pinctrl/actions,s500-pinctrl.yaml | 102 +++++++++---------
.../bindings/pinctrl/pinctrl-mt8192.yaml | 2 +-
.../pinctrl/qcom,msm8226-pinctrl.yaml | 6 +-
.../pinctrl/toshiba,visconti-pinctrl.yaml | 24 ++---
.../bindings/power/reset/reboot-mode.yaml | 6 +-
.../power/supply/ingenic,battery.yaml | 8 +-
.../power/supply/summit,smb347-charger.yaml | 16 +--
.../bindings/riscv/sifive-l2-cache.yaml | 4 +-
.../devicetree/bindings/rng/imx-rng.yaml | 6 +-
.../bindings/serial/fsl-imx-uart.yaml | 34 +++---
.../bindings/sound/mchp,spdifrx.yaml | 4 +-
.../bindings/sound/mchp,spdiftx.yaml | 4 +-
.../bindings/sound/qcom,lpass-cpu.yaml | 40 +++----
.../devicetree/bindings/timer/arm,sp804.yaml | 12 +--
.../devicetree/bindings/usb/cdns,usb3.yaml | 4 +-
.../devicetree/bindings/usb/ti,hd3ss3220.yaml | 2 +-
.../devicetree/bindings/w1/fsl-imx-owire.yaml | 8 +-
33 files changed, 210 insertions(+), 206 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
index 31f085d8ab13..526bbd63924b 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Toshiba TC358775 DSI to LVDS bridge bindings
maintainers:
- - Vinay Simha BN <simhavcs at gmail.com>
+ - Vinay Simha BN <simhavcs at gmail.com>
description: |
This binding supports DSI to LVDS bridge TC358775
@@ -29,7 +29,7 @@ properties:
vdd-supply:
maxItems: 1
- description: 1.2V LVDS Power Supply
+ description: 1.2V LVDS Power Supply
vddio-supply:
maxItems: 1
@@ -77,13 +77,13 @@ properties:
- port at 1
required:
- - compatible
- - reg
- - vdd-supply
- - vddio-supply
- - stby-gpios
- - reset-gpios
- - ports
+ - compatible
+ - reg
+ - vdd-supply
+ - vddio-supply
+ - stby-gpios
+ - reset-gpios
+ - ports
examples:
- |
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
index c60b3bd74337..b2fcec4f22fd 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
@@ -13,9 +13,8 @@ properties:
compatible:
items:
- enum:
- - bananapi,lhr050h41
- - feixin,k101-im2byl02
-
+ - bananapi,lhr050h41
+ - feixin,k101-im2byl02
- const: ilitek,ili9881c
backlight: true
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
index 9810619a2b5c..744973637678 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -81,14 +81,14 @@ properties:
at25,byte-len:
$ref: /schemas/types.yaml#/definitions/uint32
description:
- Total eeprom size in bytes. Deprecated, use "size" property instead.
+ Total eeprom size in bytes. Deprecated, use "size" property instead.
deprecated: true
at25,addr-mode:
$ref: /schemas/types.yaml#/definitions/uint32
description:
- Addr-mode flags, as defined in include/linux/spi/eeprom.h.
- Deprecated, use "address-width" property instead.
+ Addr-mode flags, as defined in include/linux/spi/eeprom.h.
+ Deprecated, use "address-width" property instead.
deprecated: true
at25,page-size:
diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
index e2d2c10e536a..b032471831e7 100644
--- a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
@@ -43,8 +43,8 @@ properties:
gpio-controller: true
gpio-line-names:
- minItems: 1
- maxItems: 8
+ minItems: 1
+ maxItems: 8
required:
- compatible
diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
index 0e7b4b8a7e48..e1e65eb4f795 100644
--- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -19,11 +19,11 @@ properties:
compatible:
oneOf:
- enum:
- - ingenic,jz4770-i2c
- - ingenic,x1000-i2c
+ - ingenic,jz4770-i2c
+ - ingenic,x1000-i2c
- items:
- - const: ingenic,jz4780-i2c
- - const: ingenic,jz4770-i2c
+ - const: ingenic,jz4780-i2c
+ - const: ingenic,jz4770-i2c
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
index 6feafb7e531e..930f9e3904d7 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
@@ -43,4 +43,5 @@ examples:
vref-supply = <&adc_vref>;
};
};
-...
\ No newline at end of file
+...
+
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index d3733ad8785a..8f32800fe5b7 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -46,7 +46,8 @@ properties:
spi-max-frequency: true
spi-cpol: true
- spi-cpha : true
+
+ spi-cpha: true
"#io-channel-cells":
const: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
index 5d92b477e23f..4e695b97d015 100644
--- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
@@ -22,8 +22,8 @@ properties:
adc-reserved-channels:
$ref: /schemas/types.yaml#/definitions/uint32
description:
- Bitmask of reserved channels, i.e. channels that cannot be
- used by the OS.
+ Bitmask of reserved channels, i.e. channels that cannot be
+ used by the OS.
clocks:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
index 9514c3381c42..52490cbb0af0 100644
--- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
@@ -21,7 +21,7 @@ properties:
gpios:
description:
- GPIO used for controlling the reset pin
+ GPIO used for controlling the reset pin
maxItems: 1
spi-max-frequency: true
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
index bbf79d125675..1c4c009dedd0 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
@@ -94,12 +94,12 @@ properties:
instances.
required:
- - compatible
- - reg
- - interrupts
- - interrupt-names
- - interrupt-controller
- - "#interrupt-cells"
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - interrupt-controller
+ - "#interrupt-cells"
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
index 074243c40891..08af356f5d27 100644
--- a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
+++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
@@ -17,7 +17,7 @@ properties:
compatible:
items:
- enum:
- - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020)
+ - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020)
- const: ene,kb3930
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
index 58fe9d02a781..0753289fba84 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -32,11 +32,11 @@ allOf:
clock-output-names:
oneOf:
- items:
- - const: clk_out_sd0
- - const: clk_in_sd0
+ - const: clk_out_sd0
+ - const: clk_in_sd0
- items:
- - const: clk_out_sd1
- - const: clk_in_sd1
+ - const: clk_out_sd1
+ - const: clk_in_sd1
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
index ac79f3adf20b..2cd859066462 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -3,7 +3,7 @@
%YAML 1.2
---
$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#"
-$schema : "http://devicetree.org/meta-schemas/core.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: TI AM654 MMC Controller
@@ -163,13 +163,12 @@ properties:
ti,driver-strength-ohm:
description: DLL drive strength in ohms
$ref: "/schemas/types.yaml#/definitions/uint32"
- oneOf:
- - enum:
- - 33
- - 40
- - 50
- - 66
- - 100
+ enum:
+ - 33
+ - 40
+ - 50
+ - 66
+ - 100
ti,strobe-sel:
description: strobe select delay for HS400 speed mode.
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
index f4292d2c54e3..d6cf8a560ef0 100644
--- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -29,16 +29,16 @@ properties:
reg-names:
oneOf:
- items:
- - const: dbi
- - const: dbi2
- - const: link
- - const: addr_space
+ - const: dbi
+ - const: dbi2
+ - const: link
+ - const: addr_space
- items:
- - const: dbi
- - const: dbi2
- - const: link
- - const: addr_space
- - const: atu
+ - const: dbi
+ - const: dbi2
+ - const: link
+ - const: addr_space
+ - const: atu
clocks:
maxItems: 2
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
index bab2ff4d9dc9..34756347a14e 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -31,10 +31,10 @@ properties:
clock-names:
oneOf:
- items: # for PXs2
- - const: link
+ - const: link
- items: # for others
- - const: link
- - const: phy
+ - const: link
+ - const: phy
resets:
maxItems: 2
diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
index 15207ca9548f..ab77a65c5c55 100644
--- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
@@ -7,23 +7,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: OMAP USB2 PHY
maintainers:
- - Kishon Vijay Abraham I <kishon at ti.com>
- - Roger Quadros <rogerq at ti.com>
+ - Kishon Vijay Abraham I <kishon at ti.com>
+ - Roger Quadros <rogerq at ti.com>
properties:
compatible:
oneOf:
- items:
- - enum:
- - ti,dra7x-usb2
- - ti,dra7x-usb2-phy2
- - ti,am654-usb2
- - enum:
- - ti,omap-usb2
+ - enum:
+ - ti,dra7x-usb2
+ - ti,dra7x-usb2-phy2
+ - ti,am654-usb2
+ - enum:
+ - ti,omap-usb2
- items:
- - const: ti,am437x-usb2
+ - const: ti,am437x-usb2
- items:
- - const: ti,omap-usb2
+ - const: ti,omap-usb2
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
index 33391d30c00c..ccdd9e3820d7 100644
--- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
@@ -76,22 +76,22 @@ patternProperties:
items:
oneOf:
- enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
- rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
- rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
- i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
- ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
- ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
- dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
- dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
- spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
- dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
- uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
- sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
- uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
- uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
- pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
- dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
- nand_ceb3_mfp]
+ rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
+ rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
+ i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
+ ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
+ ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
+ dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
+ dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
+ spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
+ dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
+ uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
+ sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
+ uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
+ uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
+ pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
+ dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
+ nand_ceb3_mfp]
minItems: 1
maxItems: 32
@@ -100,10 +100,10 @@ patternProperties:
Specify the alternative function to be configured for the
given gpio pin groups.
enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
- sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
- i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
- p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
- mipi_csi, nand, spdif, ts, lcd0]
+ sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
+ i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+ p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
+ mipi_csi, nand, spdif, ts, lcd0]
required:
- groups
@@ -126,14 +126,14 @@ patternProperties:
items:
oneOf:
- enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
- rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
- smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
- i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
- lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
- sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
- spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
- i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
- sens0_ckout_drv, uart3_all_drv]
+ rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
+ smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
+ i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
+ lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
+ sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
+ spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
+ i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
+ sens0_ckout_drv, uart3_all_drv]
minItems: 1
maxItems: 32
@@ -144,29 +144,29 @@ patternProperties:
items:
oneOf:
- enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
- eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
- eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
- i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
- i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
- ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
- lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
- lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
- lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
- dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
- dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
- sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
- spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
- uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
- sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
- dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
- uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
- pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
- i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
- csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
- csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
- dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
- dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
- pkg2, pkg3]
+ eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
+ eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+ i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
+ i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
+ ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
+ lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
+ lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
+ lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
+ dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
+ dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
+ sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
+ spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
+ uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
+ sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
+ dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
+ uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
+ pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
+ i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
+ csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
+ csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
+ dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
+ dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
+ pkg2, pkg3]
minItems: 1
maxItems: 64
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
index 5556def6b99b..c4c071211611 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
@@ -106,7 +106,7 @@ patternProperties:
required:
- pinmux
- additionalProperties: false
+ additionalProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index 1f0f5757f9e1..040d2ada3669 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -71,9 +71,9 @@ patternProperties:
Specify the alternative function to be configured for the specified
pins. Functions are only valid for gpio pins.
enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
- blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
- blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
- blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+ blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+ blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+ blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
index d0d1a01140ea..9f1dab0c2430 100644
--- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -40,24 +40,24 @@ patternProperties:
Function to mux.
$ref: "/schemas/types.yaml#/definitions/string"
enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8,
- spi0, spi1, spi2, spi3, spi4, spi5, spi6,
- uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
+ spi0, spi1, spi2, spi3, spi4, spi5, spi6,
+ uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
groups:
description:
Name of the pin group to use for the functions.
$ref: "/schemas/types.yaml#/definitions/string"
enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
- i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
- spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
- spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
- uart0_grp, uart1_grp, uart2_grp, uart3_grp,
- pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
- pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
- pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
- pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
- pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
- pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
+ i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
+ spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
+ spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
+ uart0_grp, uart1_grp, uart2_grp, uart3_grp,
+ pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
+ pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
+ pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
+ pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
+ pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
+ pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
drive-strength:
enum: [2, 4, 6, 8, 16, 24, 32]
diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
index a6c91026d4cc..a2dca38577f7 100644
--- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
+++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
@@ -28,9 +28,9 @@ description: |
properties:
mode-normal:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Default value to set on a reboot if no command was provided.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Default value to set on a reboot if no command was provided.
patternProperties:
"^mode-.*$":
diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
index 867e3e6b7e80..76c227a7cd5c 100644
--- a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
@@ -15,10 +15,10 @@ properties:
oneOf:
- const: ingenic,jz4740-battery
- items:
- - enum:
- - ingenic,jz4725b-battery
- - ingenic,jz4770-battery
- - const: ingenic,jz4740-battery
+ - enum:
+ - ingenic,jz4725b-battery
+ - ingenic,jz4770-battery
+ - const: ingenic,jz4740-battery
io-channels:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
index 193a23af2007..983fc215c1e5 100644
--- a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
@@ -84,12 +84,12 @@ allOf:
then:
properties:
summit,mains-current-limit-microamp:
- enum: [ 300000, 500000, 700000, 1000000,
- 1500000, 1800000, 2000000]
+ enum: [ 300000, 500000, 700000, 1000000,
+ 1500000, 1800000, 2000000]
summit,usb-current-limit-microamp:
- enum: [ 300000, 500000, 700000, 1000000,
- 1500000, 1800000, 2000000]
+ enum: [ 300000, 500000, 700000, 1000000,
+ 1500000, 1800000, 2000000]
summit,charge-current-compensation-microamp:
enum: [200000, 450000, 600000, 900000]
@@ -97,12 +97,12 @@ allOf:
else:
properties:
summit,mains-current-limit-microamp:
- enum: [ 300000, 500000, 700000, 900000, 1200000,
- 1500000, 1800000, 2000000, 2200000, 2500000]
+ enum: [ 300000, 500000, 700000, 900000, 1200000,
+ 1500000, 1800000, 2000000, 2200000, 2500000]
summit,usb-current-limit-microamp:
- enum: [ 300000, 500000, 700000, 900000, 1200000,
- 1500000, 1800000, 2000000, 2200000, 2500000]
+ enum: [ 300000, 500000, 700000, 900000, 1200000,
+ 1500000, 1800000, 2000000, 2200000, 2500000]
summit,charge-current-compensation-microamp:
enum: [250000, 700000, 900000, 1200000]
diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
index 3f4a1939554d..efc0198eeb74 100644
--- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
+++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
@@ -25,8 +25,8 @@ select:
properties:
compatible:
items:
- - enum:
- - sifive,fu540-c000-ccache
+ - enum:
+ - sifive,fu540-c000-ccache
required:
- compatible
diff --git a/Documentation/devicetree/bindings/rng/imx-rng.yaml b/Documentation/devicetree/bindings/rng/imx-rng.yaml
index 4ad1e456a801..07f6ff89bcc1 100644
--- a/Documentation/devicetree/bindings/rng/imx-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/imx-rng.yaml
@@ -19,9 +19,9 @@ properties:
- const: fsl,imx21-rnga
- items:
- enum:
- - fsl,imx6sl-rngb
- - fsl,imx6sll-rngb
- - fsl,imx6ull-rngb
+ - fsl,imx6sl-rngb
+ - fsl,imx6sll-rngb
+ - fsl,imx6ull-rngb
- const: fsl,imx25-rngb
- const: fsl,imx35-rngc
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index 9ff85bc6859c..9702c07a6b6c 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -20,30 +20,30 @@ properties:
- const: fsl,imx21-uart
- items:
- enum:
- - fsl,imx25-uart
- - fsl,imx27-uart
- - fsl,imx31-uart
- - fsl,imx35-uart
- - fsl,imx50-uart
- - fsl,imx51-uart
- - fsl,imx53-uart
- - fsl,imx6q-uart
+ - fsl,imx25-uart
+ - fsl,imx27-uart
+ - fsl,imx31-uart
+ - fsl,imx35-uart
+ - fsl,imx50-uart
+ - fsl,imx51-uart
+ - fsl,imx53-uart
+ - fsl,imx6q-uart
- const: fsl,imx21-uart
- items:
- enum:
- - fsl,imx6sl-uart
- - fsl,imx6sll-uart
- - fsl,imx6sx-uart
+ - fsl,imx6sl-uart
+ - fsl,imx6sll-uart
+ - fsl,imx6sx-uart
- const: fsl,imx6q-uart
- const: fsl,imx21-uart
- items:
- enum:
- - fsl,imx6ul-uart
- - fsl,imx7d-uart
- - fsl,imx8mm-uart
- - fsl,imx8mn-uart
- - fsl,imx8mp-uart
- - fsl,imx8mq-uart
+ - fsl,imx6ul-uart
+ - fsl,imx7d-uart
+ - fsl,imx8mm-uart
+ - fsl,imx8mn-uart
+ - fsl,imx8mp-uart
+ - fsl,imx8mq-uart
- const: fsl,imx6q-uart
reg:
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
index 7d8bd4e14434..4a2129005c0f 100644
--- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
+++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
@@ -10,8 +10,8 @@ maintainers:
- Codrin Ciubotariu <codrin.ciubotariu at microchip.com>
description:
- The Microchip Sony/Philips Digital Interface Receiver is a
- serial port compliant with the IEC-60958 standard.
+ The Microchip Sony/Philips Digital Interface Receiver is a serial port
+ compliant with the IEC-60958 standard.
properties:
"#sound-dai-cells":
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
index a03b0b871fc9..bdfb63387c53 100644
--- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
+++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
@@ -10,8 +10,8 @@ maintainers:
- Codrin Ciubotariu <codrin.ciubotariu at microchip.com>
description:
- The Microchip Sony/Philips Digital Interface Transmitter is a
- serial port compliant with the IEC-60958 standard.
+ The Microchip Sony/Philips Digital Interface Transmitter is a serial port
+ compliant with the IEC-60958 standard.
properties:
"#sound-dai-cells":
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
index f6f9fb49f385..1e23c0e20bc1 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -26,8 +26,10 @@ properties:
reg:
maxItems: 2
description: LPAIF core registers
+
reg-names:
- maxItems: 2
+ maxItems: 2
+
clocks:
minItems: 3
maxItems: 6
@@ -39,8 +41,10 @@ properties:
interrupts:
maxItems: 2
description: LPAIF DMA buffer interrupt
+
interrupt-names:
maxItems: 2
+
qcom,adsp:
$ref: /schemas/types.yaml#/definitions/phandle
description: Phandle for the audio DSP node
@@ -141,31 +145,31 @@ allOf:
properties:
clock-names:
oneOf:
- - items: #for I2S
- - const: pcnoc-sway-clk
- - const: audio-core
- - const: mclk0
- - const: pcnoc-mport-clk
- - const: mi2s-bit-clk0
- - const: mi2s-bit-clk1
- - items: #for HDMI
- - const: pcnoc-sway-clk
- - const: audio-core
- - const: pcnoc-mport-clk
+ - items: #for I2S
+ - const: pcnoc-sway-clk
+ - const: audio-core
+ - const: mclk0
+ - const: pcnoc-mport-clk
+ - const: mi2s-bit-clk0
+ - const: mi2s-bit-clk1
+ - items: #for HDMI
+ - const: pcnoc-sway-clk
+ - const: audio-core
+ - const: pcnoc-mport-clk
reg-names:
anyOf:
- items: #for I2S
- - const: lpass-lpaif
+ - const: lpass-lpaif
- items: #for I2S and HDMI
- - const: lpass-hdmiif
- - const: lpass-lpaif
+ - const: lpass-hdmiif
+ - const: lpass-lpaif
interrupt-names:
anyOf:
- items: #for I2S
- - const: lpass-irq-lpaif
+ - const: lpass-irq-lpaif
- items: #for I2S and HDMI
- - const: lpass-irq-lpaif
- - const: lpass-irq-hdmi
+ - const: lpass-irq-lpaif
+ - const: lpass-irq-hdmi
required:
- iommus
- power-domains
diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml
index e35d3053250a..960e2bd66a97 100644
--- a/Documentation/devicetree/bindings/timer/arm,sp804.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml
@@ -33,8 +33,8 @@ properties:
compatible:
items:
- enum:
- - arm,sp804
- - hisilicon,sp804
+ - arm,sp804
+ - hisilicon,sp804
- const: arm,primecell
interrupts:
@@ -58,11 +58,11 @@ properties:
clock is used for all clock inputs.
oneOf:
- items:
- - description: clock for timer 1
- - description: clock for timer 2
- - description: bus clock
+ - description: clock for timer 1
+ - description: clock for timer 2
+ - description: bus clock
- items:
- - description: unified clock for both timers and the bus
+ - description: unified clock for both timers and the bus
clock-names: true
# The original binding did not specify any clock names, and there is no
diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index ac20b98e9910..d6af2794d444 100644
--- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -44,8 +44,8 @@ properties:
enum: [super-speed, high-speed, full-speed]
phys:
- minItems: 1
- maxItems: 2
+ minItems: 1
+ maxItems: 2
phy-names:
minItems: 1
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
index 5fe9e6211ba2..52ceb07294a3 100644
--- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
@@ -17,7 +17,7 @@ description: |-
properties:
compatible:
- const: ti,hd3ss3220
+ const: ti,hd3ss3220
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml
index 1aaf3e768c81..55adea827c34 100644
--- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml
+++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml
@@ -15,10 +15,10 @@ properties:
- const: fsl,imx21-owire
- items:
- enum:
- - fsl,imx27-owire
- - fsl,imx50-owire
- - fsl,imx51-owire
- - fsl,imx53-owire
+ - fsl,imx27-owire
+ - fsl,imx50-owire
+ - fsl,imx51-owire
+ - fsl,imx53-owire
- const: fsl,imx21-owire
reg:
--
2.25.1
More information about the linux-mtd
mailing list