[PATCH] mtd: rawnand: mxc: Move the ECC engine initialization to the right place

[Miquel Raynal]

No ECC initialization should happen during the host controller probe.

Indeed, we need the probe to call nand_scan() in order to:
- identify the device, its capabilities and constraints (nand_scan_ident())
- configure the ECC engine accordingly (->attach_chip())
- scan its content and prepare the core (nand_scan_tail())

Moving these lines to mxcnd_attach_chip() fixes a regression caused by
a previous commit supposed to clarify these steps.

Fixes: TODO
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---

Hi Han,

Could you please give this patch a shot? It is supposed to fix
the LS1043A issue we have seen in robots reports the last weeks.

I kept the Fixes: tag empty because I need the original patch to be
merged in Linus' tree first but if it fixes the issue I will merge it
at -rc1 or -rc2.

Thanks,
Miquèl

 drivers/mtd/nand/raw/mxc_nand.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index d4200eb2ad32..6ba96f343a3d 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -1681,6 +1681,18 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
 	struct mxc_nand_host *host = nand_get_controller_data(chip);
 	struct device *dev = mtd->dev.parent;
 
+	chip->ecc.bytes = host->devtype_data->eccbytes;
+	host->eccsize = host->devtype_data->eccsize;
+	chip->ecc.size = 512;
+	mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
+
+	if (host->pdata.hw_ecc) {
+		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+	} else {
+		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+		chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
+	}
+
 	switch (chip->ecc.engine_type) {
 	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		chip->ecc.read_page = mxc_nand_read_page;
@@ -1836,19 +1848,7 @@ static int mxcnd_probe(struct platform_device *pdev)
 	if (host->devtype_data->axi_offset)
 		host->regs_axi = host->base + host->devtype_data->axi_offset;
 
-	this->ecc.bytes = host->devtype_data->eccbytes;
-	host->eccsize = host->devtype_data->eccsize;
-
 	this->legacy.select_chip = host->devtype_data->select_chip;
-	this->ecc.size = 512;
-	mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
-
-	if (host->pdata.hw_ecc) {
-		this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
-	} else {
-		this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-		this->ecc.algo = NAND_ECC_ALGO_HAMMING;
-	}
 
 	/* NAND bus width determines access functions used by upper layer */
 	if (host->pdata.width == 2)
-- 
2.20.1