[PATCH v16 04/15] mtd: spi-nor: sfdp: get command opcode extension type from BFPT
Pratyush Yadav
p.yadav at ti.com
Mon Oct 5 11:31:27 EDT 2020
Some devices in DTR mode expect an extra command byte called the
extension. The extension can either be same as the opcode, bitwise
inverse of the opcode, or another additional byte forming a 16-byte
opcode. Get the extension type from the BFPT. For now, only flashes with
"repeat" and "inverse" extensions are supported.
Signed-off-by: Pratyush Yadav <p.yadav at ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
drivers/mtd/spi-nor/sfdp.c | 18 ++++++++++++++++++
drivers/mtd/spi-nor/sfdp.h | 6 ++++++
2 files changed, 24 insertions(+)
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index 21fa9ab78eae..c77655968f80 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -606,6 +606,24 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
params);
+ /* 8D-8D-8D command extension. */
+ switch (bfpt.dwords[BFPT_DWORD(18)] & BFPT_DWORD18_CMD_EXT_MASK) {
+ case BFPT_DWORD18_CMD_EXT_REP:
+ nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
+ break;
+
+ case BFPT_DWORD18_CMD_EXT_INV:
+ nor->cmd_ext_type = SPI_NOR_EXT_INVERT;
+ break;
+
+ case BFPT_DWORD18_CMD_EXT_RES:
+ dev_dbg(nor->dev, "Reserved command extension used\n");
+ break;
+
+ case BFPT_DWORD18_CMD_EXT_16B:
+ dev_dbg(nor->dev, "16-bit opcodes not supported\n");
+ return -EOPNOTSUPP;
+ }
return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
}
diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
index 7f9846b3a1ad..6d7243067252 100644
--- a/drivers/mtd/spi-nor/sfdp.h
+++ b/drivers/mtd/spi-nor/sfdp.h
@@ -90,6 +90,12 @@ struct sfdp_bfpt {
#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20)
#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */
+#define BFPT_DWORD18_CMD_EXT_MASK GENMASK(30, 29)
+#define BFPT_DWORD18_CMD_EXT_REP (0x0UL << 29) /* Repeat */
+#define BFPT_DWORD18_CMD_EXT_INV (0x1UL << 29) /* Invert */
+#define BFPT_DWORD18_CMD_EXT_RES (0x2UL << 29) /* Reserved */
+#define BFPT_DWORD18_CMD_EXT_16B (0x3UL << 29) /* 16-bit opcode */
+
struct sfdp_parameter_header {
u8 id_lsb;
u8 minor;
--
2.28.0
More information about the linux-mtd
mailing list