[PATCH 13/19] mtd: rawnand: txx9ndfmc: Move the ECC initialization to ->attach_chip()

[Miquel Raynal]

The probe function is only supposed to initialize the controller
hardware but not the ECC engine. Indeed, we don't know anything about
the NAND chip(s) at this stage. Let's move the logic initializing the
ECC engine, even pretty simple, to the ->attach_chip() hook which gets
called during nand_scan() routine, after the NAND chip discovery. As
the previously mentioned logic is supposed to parse the DT for us, it
is likely that the chip->ecc.* entries be overwritten. So let's avoid
this by moving these lines to ->attach_chip().

Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/raw/txx9ndfmc.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/raw/txx9ndfmc.c b/drivers/mtd/nand/raw/txx9ndfmc.c
index 5f3dbff60d47..1a9449e53bf9 100644
--- a/drivers/mtd/nand/raw/txx9ndfmc.c
+++ b/drivers/mtd/nand/raw/txx9ndfmc.c
@@ -252,6 +252,11 @@ static int txx9ndfmc_attach_chip(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
 
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
+		return 0;
+
+	chip->ecc.strength = 1;
+
 	if (mtd->writesize >= 512) {
 		chip->ecc.size = 512;
 		chip->ecc.bytes = 6;
@@ -260,6 +265,10 @@ static int txx9ndfmc_attach_chip(struct nand_chip *chip)
 		chip->ecc.bytes = 3;
 	}
 
+	chip->ecc.calculate = txx9ndfmc_calculate_ecc;
+	chip->ecc.correct = txx9ndfmc_correct_data;
+	chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
+
 	return 0;
 }
 
@@ -325,11 +334,6 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
 		chip->legacy.write_buf = txx9ndfmc_write_buf;
 		chip->legacy.cmd_ctrl = txx9ndfmc_cmd_ctrl;
 		chip->legacy.dev_ready = txx9ndfmc_dev_ready;
-		chip->ecc.calculate = txx9ndfmc_calculate_ecc;
-		chip->ecc.correct = txx9ndfmc_correct_data;
-		chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
-		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
-		chip->ecc.strength = 1;
 		chip->legacy.chip_delay = 100;
 		chip->controller = &drvdata->controller;
 
-- 
2.20.1