[PATCH 12/19] mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()

Miquel Raynal miquel.raynal at bootlin.com
Fri Nov 13 07:34:17 EST 2020


The probe function is only supposed to initialize the controller
hardware but not the ECC engine. Indeed, we don't know anything about
the NAND chip(s) at this stage. Let's move the logic initializing the
ECC engine, even pretty simple, to the ->attach_chip() hook which gets
called during nand_scan() routine, after the NAND chip discovery. As
the previously mentioned logic is supposed to parse the DT for us, it
is likely that the chip->ecc.* entries be overwritten. So let's avoid
this by moving these lines to ->attach_chip().

Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/raw/orion_nand.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/orion_nand.c b/drivers/mtd/nand/raw/orion_nand.c
index df9c0f8e4b4e..e3bb65fd3ab2 100644
--- a/drivers/mtd/nand/raw/orion_nand.c
+++ b/drivers/mtd/nand/raw/orion_nand.c
@@ -22,6 +22,7 @@
 #include <linux/platform_data/mtd-orion_nand.h>
 
 struct orion_nand_info {
+	struct nand_controller controller;
 	struct nand_chip chip;
 	struct clk *clk;
 };
@@ -82,6 +83,18 @@ static void orion_nand_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
 		buf[i++] = readb(io_base);
 }
 
+static int orion_nand_attach_chip(struct nand_chip *chip)
+{
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
+
+	return 0;
+}
+
+static const struct nand_controller_ops orion_nand_ops = {
+	.attach_chip = orion_nand_attach_chip,
+};
+
 static int __init orion_nand_probe(struct platform_device *pdev)
 {
 	struct orion_nand_info *info;
@@ -101,6 +114,10 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	nc = &info->chip;
 	mtd = nand_to_mtd(nc);
 
+	nand_controller_init(&info->controller);
+	info->controller.ops = &orion_nand_ops;
+	nc->controller = &info->controller;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	io_base = devm_ioremap_resource(&pdev->dev, res);
 
@@ -139,8 +156,6 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	nc->legacy.IO_ADDR_R = nc->legacy.IO_ADDR_W = io_base;
 	nc->legacy.cmd_ctrl = orion_nand_cmd_ctrl;
 	nc->legacy.read_buf = orion_nand_read_buf;
-	nc->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-	nc->ecc.algo = NAND_ECC_ALGO_HAMMING;
 
 	if (board->chip_delay)
 		nc->legacy.chip_delay = board->chip_delay;
-- 
2.20.1




More information about the linux-mtd mailing list