[PATCH v2 19/23] mtd: nand: raw: omap2: Fix a bunch of kernel-doc misdemeanours

Lee Jones lee.jones at linaro.org
Fri Nov 6 16:36:51 EST 2020


Fixes the following W=1 kernel build warning(s):

 drivers/mtd/nand/raw/omap2.c:191: warning: Function parameter or member 'info' not described in 'omap_prefetch_enable'
 drivers/mtd/nand/raw/omap2.c:221: warning: Function parameter or member 'cs' not described in 'omap_prefetch_reset'
 drivers/mtd/nand/raw/omap2.c:221: warning: Function parameter or member 'info' not described in 'omap_prefetch_reset'
 drivers/mtd/nand/raw/omap2.c:946: warning: Function parameter or member 'chip' not described in 'omap_enable_hwecc'
 drivers/mtd/nand/raw/omap2.c:946: warning: Excess function parameter 'mtd' description in 'omap_enable_hwecc'
 drivers/mtd/nand/raw/omap2.c:1017: warning: Function parameter or member 'chip' not described in 'omap_dev_ready'
 drivers/mtd/nand/raw/omap2.c:1017: warning: Excess function parameter 'mtd' description in 'omap_dev_ready'
 drivers/mtd/nand/raw/omap2.c:1036: warning: Function parameter or member 'chip' not described in 'omap_enable_hwecc_bch'
 drivers/mtd/nand/raw/omap2.c:1036: warning: Excess function parameter 'mtd' description in 'omap_enable_hwecc_bch'
 drivers/mtd/nand/raw/omap2.c:1142: warning: Function parameter or member 'ecc_calc' not described in '_omap_calculate_ecc_bch'
 drivers/mtd/nand/raw/omap2.c:1142: warning: Excess function parameter 'ecc_code' description in '_omap_calculate_ecc_bch'
 drivers/mtd/nand/raw/omap2.c:1270: warning: Function parameter or member 'ecc_calc' not described in 'omap_calculate_ecc_bch_sw'
 drivers/mtd/nand/raw/omap2.c:1270: warning: Excess function parameter 'ecc_code' description in 'omap_calculate_ecc_bch_sw'
 drivers/mtd/nand/raw/omap2.c:1284: warning: Function parameter or member 'ecc_calc' not described in 'omap_calculate_ecc_bch_multi'
 drivers/mtd/nand/raw/omap2.c:1284: warning: Excess function parameter 'ecc_code' description in 'omap_calculate_ecc_bch_multi'
 drivers/mtd/nand/raw/omap2.c:1681: warning: Function parameter or member 'info' not described in 'is_elm_present'
 drivers/mtd/nand/raw/omap2.c:1681: warning: Function parameter or member 'elm_node' not described in 'is_elm_present'
 drivers/mtd/nand/raw/omap2.c:1681: warning: Excess function parameter 'omap_nand_info' description in 'is_elm_present'

Cc: Miquel Raynal <miquel.raynal at bootlin.com>
Cc: Richard Weinberger <richard at nod.at>
Cc: Vignesh Raghavendra <vigneshr at ti.com>
Cc: Jian Zhang <jzhang at ti.com>
Cc: linux-mtd at lists.infradead.org
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/mtd/nand/raw/omap2.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index 4cc47ab7f01ad..fbb9955f24671 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -184,6 +184,7 @@ static inline struct omap_nand_info *mtd_to_omap(struct mtd_info *mtd)
  * @dma_mode: dma mode enable (1) or disable (0)
  * @u32_count: number of bytes to be transferred
  * @is_write: prefetch read(0) or write post(1) mode
+ * @info: NAND device structure containing platform data
  */
 static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode,
 	unsigned int u32_count, int is_write, struct omap_nand_info *info)
@@ -213,7 +214,7 @@ static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode,
 	return 0;
 }
 
-/**
+/*
  * omap_prefetch_reset - disables and stops the prefetch engine
  */
 static int omap_prefetch_reset(int cs, struct omap_nand_info *info)
@@ -938,7 +939,7 @@ static int omap_calculate_ecc(struct nand_chip *chip, const u_char *dat,
 
 /**
  * omap_enable_hwecc - This function enables the hardware ecc functionality
- * @mtd: MTD device structure
+ * @chip: NAND chip object
  * @mode: Read/Write mode
  */
 static void omap_enable_hwecc(struct nand_chip *chip, int mode)
@@ -1008,7 +1009,7 @@ static int omap_wait(struct nand_chip *this)
 
 /**
  * omap_dev_ready - checks the NAND Ready GPIO line
- * @mtd: MTD device structure
+ * @chip: NAND chip object
  *
  * Returns true if ready and false if busy.
  */
@@ -1021,7 +1022,7 @@ static int omap_dev_ready(struct nand_chip *chip)
 
 /**
  * omap_enable_hwecc_bch - Program GPMC to perform BCH ECC calculation
- * @mtd: MTD device structure
+ * @chip: NAND chip object
  * @mode: Read/Write mode
  *
  * When using BCH with SW correction (i.e. no ELM), sector size is set
@@ -1130,7 +1131,7 @@ static u8  bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
  * _omap_calculate_ecc_bch - Generate ECC bytes for one sector
  * @mtd:	MTD device structure
  * @dat:	The pointer to data on which ecc is computed
- * @ecc_code:	The ecc_code buffer
+ * @ecc_calc:	The ecc_code buffer
  * @i:		The sector number (for a multi sector page)
  *
  * Support calculating of BCH4/8/16 ECC vectors for one sector
@@ -1258,7 +1259,7 @@ static int _omap_calculate_ecc_bch(struct mtd_info *mtd,
  * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction
  * @chip:	NAND chip object
  * @dat:	The pointer to data on which ecc is computed
- * @ecc_code:	The ecc_code buffer
+ * @ecc_calc:	Buffer storing the calculated ECC bytes
  *
  * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used
  * when SW based correction is required as ECC is required for one sector
@@ -1274,7 +1275,7 @@ static int omap_calculate_ecc_bch_sw(struct nand_chip *chip,
  * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors
  * @mtd:	MTD device structure
  * @dat:	The pointer to data on which ecc is computed
- * @ecc_code:	The ecc_code buffer
+ * @ecc_calc:	Buffer storing the calculated ECC bytes
  *
  * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go.
  */
@@ -1673,7 +1674,8 @@ static int omap_read_page_bch(struct nand_chip *chip, uint8_t *buf,
 
 /**
  * is_elm_present - checks for presence of ELM module by scanning DT nodes
- * @omap_nand_info: NAND device structure containing platform data
+ * @info: NAND device structure containing platform data
+ * @elm_node: ELM's DT node
  */
 static bool is_elm_present(struct omap_nand_info *info,
 			   struct device_node *elm_node)
-- 
2.25.1




More information about the linux-mtd mailing list