[PATCH v2] mtd: spinand: macronix: Add support for MX35LFxGE4AD

[YouChing Lin]

The Macronix MX35LF2GE4AD / MX35LF4GE4AD are 3V, 2G / 4Gbit serial
SLC NAND flash device (with on-die ECC).

Validated by read, erase, read back, write, read back and nandtest
on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host
(drivers/spi/spi-mxic.c).

v2: Removed the unnecessary "/*SPINAND_HAS_QE_BIT*/" as per the comments.

v1: Add support for MX35LFxGE4AD

Signed-off-by: YouChing Lin <ycllin at mxic.com.tw>
---
 drivers/mtd/nand/spi/macronix.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 8e801e4..3786b1b 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -119,6 +119,26 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
 					      &update_cache_variants),
 		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)),
+	SPINAND_INFO("MX35LF2GE4AD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x26),
+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+				     mx35lf1ge4ab_ecc_get_status)),
+	SPINAND_INFO("MX35LF4GE4AD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x37),
+		     NAND_MEMORG(1, 4096, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+				     mx35lf1ge4ab_ecc_get_status)),
 	SPINAND_INFO("MX31LF1GE4BC",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x1e),
 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
-- 
1.9.1