[PATCH] mtd: spinand: macronix: Add support for MX35LFxGE4AD

[Miquel Raynal]

Hi YouChing,

YouChing Lin <ycllin at mxic.com.tw> wrote on Wed,  4 Nov 2020 19:47:22
+0800:

> The Macronix MX35LF2GE4AD / MX35LF4GE4AD are 3V, 2G / 4Gbit serial
> SLC NAND flash device (with on-die ECC).
> 
> Validated by read, erase, read back, write, read back and nandtest
> on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host
> (drivers/spi/spi-mxic.c).
> 
> Signed-off-by: YouChing Lin <ycllin at mxic.com.tw>
> ---
>  drivers/mtd/nand/spi/macronix.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
> index 8e801e4..4f7f954 100644
> --- a/drivers/mtd/nand/spi/macronix.c
> +++ b/drivers/mtd/nand/spi/macronix.c
> @@ -119,6 +119,26 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
>  					      &update_cache_variants),
>  		     SPINAND_HAS_QE_BIT,
>  		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)),
> +	SPINAND_INFO("MX35LF2GE4AD",
> +		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x26),
> +		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     0 /*SPINAND_HAS_QE_BIT*/,

What is the purpose of this comment? Shouldn't get rid of it and just
keep '0' if the QE bit is not supported?

> +		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
> +				     mx35lf1ge4ab_ecc_get_status)),
> +	SPINAND_INFO("MX35LF4GE4AD",
> +		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x37),
> +		     NAND_MEMORG(1, 4096, 128, 64, 2048, 40, 1, 1, 1),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     0 /*SPINAND_HAS_QE_BIT*/,

Ditto

> +		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
> +				     mx35lf1ge4ab_ecc_get_status)),
>  	SPINAND_INFO("MX31LF1GE4BC",
>  		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x1e),
>  		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),

Thanks,
Miquèl