[PATCH v13 2/8] mtd: rawnand: rockchip: NFC drivers for RK3308, RK2928 and others

Johan Jonker jbx6244 at gmail.com
Mon Nov 2 11:31:18 EST 2020


On 11/2/20 2:11 PM, Johan Jonker wrote:
> Hi,
> 
> On 11/2/20 2:07 PM, Miquel Raynal wrote:
>> Hi Johan, Yifeng
>>
>> Johan Jonker <jbx6244 at gmail.com> wrote on Mon, 2 Nov 2020 13:57:56
>> +0100:
>>
>>> Hi Yifeng,
>>>
>>> Don't poke with "ecc->bytes" ones it is set in rk_nfc_ecc_init(). It
>>> will not be noted by the MTD frame work or userspace. I think there's
>>> currently no way to let the user know that a different ECC must be used.
>>> Neither can the user set ECC on the fly.
>>>
>>> Example R/W flow:
>>>
>>>         nand_select_target()
>>> 	chip->ecc.write_page_raw()
>>> 	chip->ecc.write_page()
>>>
>>> [..]
>>>
>>> 	chip->ecc.read_page_raw()
>>> 	chip->ecc.read_page()
>>>         nand_deselect_target()
>>>
>>> A write/read with:
>>>
>>> rk_nfc_read_page_hwecc()
>>> rk_nfc_write_page_hwecc()
>>>
>>> or
>>>
>>> rk_nfc_read_page_raw()
>>> rk_nfc_write_page_raw()
>>>
>>> must end up with the same result. If we can't archive that, then we
>>> shouldn't offer RAW mode to the user for now. If Miquel agrees you
>>> should just get the driver ready now without these 2 functions and round
>>> things up.
>>
>> What about just not supporting the BootROM area if it was marked
>> "reserved" by the BRom in the DT?
> 
> Should we just fill the buffers with '0xff' for boot blocks?

(part 2) ;)
My fault....
Better use:

    if ((chip->options & NAND_IS_BOOT_MEDIUM) &&
        (page < (pages_per_blk * rknand->boot_blks))) {

	return -EIO;

    }


> 
>>
>> Raw accessors is really a nice and basic feature that I would like to
>> have in every new driver.
>>
>> Thanks,
>> Miquèl
>>
> 




More information about the linux-mtd mailing list