[PATCH v11 2/2] dt-bindings: mtd: Document boolean NAND ECC properties

[Miquel Raynal]

Hi Rob,

Rob Herring <robh at kernel.org> wrote on Mon, 29 Jun 2020 17:08:00 -0600:

> On Fri, Jun 26, 2020 at 09:13:57AM +0200, Miquel Raynal wrote:
> > Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
> > The former is here to force software correction, the latter prevents
> > any correction to happen.
> > 
> > These properties (along with nand-ecc-engine) are supposed to be more
> > accurate than the current nand-ecc-modes wich is very misleading and
> > very often people think it is mandatory while the core should be
> > relied upon to decide which correction to handle.
> > 
> > nand-ecc-mode was already inacurate, but it becomes totally
> > problematic with setups where there are several hardware engines.
> > 
> > Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> > ---
> >  Documentation/devicetree/bindings/mtd/nand-controller.yaml | 6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > index 0969d2e6720b..a3750978ebb8 100644
> > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > @@ -68,6 +68,12 @@ patternProperties:
> >            3/ The ECC engine is external, in this case the phandle should
> >            reference the specific ECC engine node.
> >  
> > +      nand-use-soft-ecc-engine: true
> > +        description: Use a software ECC engine.
> > +
> > +      nand-no-ecc-engine: true
> > +        description: Do not use any ECC correction.
> > +  
> 
> Still the same problem as v10.

I am very sorry for the error, I fixed both commits with a fixup!
commit at the end of my series and forgot to squash them before
sending...

I'll resend the proper patches. Again, sorry for the time lost.

Thanks,
Miquèl