[PATCH v2] mtd: spi-nor: Add support for w25q32jwm

Michael Walle michael at walle.cc
Thu Jan 16 07:42:09 PST 2020


Add support for the Winbond W25Q32JW-xM flashes. These have a
programmable QE bit. There is also the W25Q32JW-xQ variant which shares
the ID with the W25Q32DW and W25Q32FW parts. The W25Q32JW-xQ has the QE
bit hard strapped to 1, thus don't support the /HOLD and /WP pins.

This was tested in single, dual and quad mode on a custom board with the
NXP FlexSPI controller. Also the BP bits as well as the TB bit were
tested.

Signed-off-by: Michael Walle <michael at walle.cc>
---
This patch superseeds the following patch:
  https://lore.kernel.org/linux-mtd/20200103223423.14025-1-michael@walle.cc/

changes since v1:
 - renamed flash to w25q32jwm
 - removed untested flashes
 - reworded the commit message

 drivers/mtd/spi-nor/spi-nor.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index d09a9e38d0bc..8226d6450069 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2651,6 +2651,11 @@ static const struct flash_info spi_nor_ids[] = {
 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 	},
+	{
+		"w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64,
+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+	},
 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
 	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
 	{
-- 
2.20.1




More information about the linux-mtd mailing list