[PATCH v2 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
broonie at kernel.org
Mon Jan 13 03:42:56 PST 2020
On Mon, Jan 13, 2020 at 10:09:27AM +0000, John Garry wrote:
> On 10/01/2020 19:31, Andy Shevchenko wrote:
> > PRP method is only for vendors to *test* the hardware in ACPI environment.
> > The proper method is to allocate correct ACPI ID.
> Yes, that would seem the proper thing to do. So the SPI NOR driver is based
> on micron m25p80 and compatible string is "jedec,spi-nor", so I don't know
> who should or would do this registration.
The idiomatic approach appears to be for individual board vendors
to allocate IDs, you do end up with multiple IDs from multiple
vendors for the same thing.
> BTW, Do any of these sensors you mention have any ACPI standardization?
In general there's not really much standardizaiton for devices,
the bindings that do exist aren't really centrally documented and
the Windows standard is just to have the basic device
registration in the firmware and do all properties based on
quirking based on DMI information.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 488 bytes
Desc: not available
More information about the linux-mtd