[PATCH 1/2] mtd: rawnand: gpmi: Fix suspend/resume problem

Esben Haabendal esben at geanix.com
Thu Jan 2 05:08:25 PST 2020


On system resume, the gpmi clock must be enabled before accessing gpmi
block.  Without this, resume causes something like

[  661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout
[  661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110
[  661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110
[  661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110

Signed-off-by: Esben Haabendal <esben at geanix.com>
---
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 334fe3130285..7ac8c8b95afc 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -148,6 +148,10 @@ static int gpmi_init(struct gpmi_nand_data *this)
 	struct resources *r = &this->resources;
 	int ret;
 
+	ret = pm_runtime_get_sync(this->dev);
+	if (ret < 0)
+		return ret;
+
 	ret = gpmi_reset_block(r->gpmi_regs, false);
 	if (ret)
 		goto err_out;
@@ -181,6 +185,8 @@ static int gpmi_init(struct gpmi_nand_data *this)
 
 	return 0;
 err_out:
+	pm_runtime_mark_last_busy(this->dev);
+	pm_runtime_put_autosuspend(this->dev);
 	return ret;
 }
 
-- 
2.24.1




More information about the linux-mtd mailing list