[PATCH v3 0/4] Add support for Qcom SMEM based NAND parser

[Manivannan Sadhasivam]

Hi,

On Thu, Nov 19, 2020 at 12:43:04PM +0530, Manivannan Sadhasivam wrote:
> Hello,
> 
> This series adds support for parsing the partitions defined in Shared
> Memory (SMEM) of the Qualcomm platforms supporting NAND interface.
> Current parser only supports V3 and V4 of the partition tables.
> 
> This series has been tested on SDX55 MTP board which has an onboard NAND
> device.
> 

Any update on this series?

Thanks,
Mani

> Thanks,
> Mani
> 
> Changes in v3:
> 
> * Handled le32 parameters in parser, collected review from Linus W.
> 
> Changes in v2:
> 
> * Added additionalProperties: false and removed unit address in binding
> 
> Manivannan Sadhasivam (4):
>   dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser
>   mtd: parsers: Add Qcom SMEM parser
>   mtd: rawnand: qcom: Add support for Qcom SMEM parser
>   mtd: parsers: afs: Fix freeing the part name memory in failure
> 
>  .../mtd/partitions/qcom,smem-part.yaml        |  33 ++++
>  drivers/mtd/nand/raw/qcom_nandc.c             |   4 +-
>  drivers/mtd/parsers/Kconfig                   |   8 +
>  drivers/mtd/parsers/Makefile                  |   1 +
>  drivers/mtd/parsers/afs.c                     |   4 +-
>  drivers/mtd/parsers/qcomsmempart.c            | 170 ++++++++++++++++++
>  6 files changed, 216 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
>  create mode 100644 drivers/mtd/parsers/qcomsmempart.c
> 
> -- 
> 2.17.1
>