[PATCH] mtd: spi-nor: macronix: enable 4-bit BP support for MX25L6405D

[Tudor.Ambarus at microchip.com]

Hi, Sieng,

On 12/7/20 4:46 AM, Sieng Piaw Liew wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Enable 4-bit Block Protect support for MX256405D and its variants using
> the same ID.
> 
> Tested on Innacom W3400V6 router with MX25L6406E chip.

:) What kind of tests did you exactly make?

> https://github.com/openwrt/openwrt/pull/3501
> 
> Signed-off-by: Sieng Piaw Liew <liew.s.piaw at gmail.com>
> ---
>  drivers/mtd/spi-nor/macronix.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
> index 9203abaac229..7aa8b1ee9daa 100644
> --- a/drivers/mtd/spi-nor/macronix.c
> +++ b/drivers/mtd/spi-nor/macronix.c
> @@ -42,7 +42,8 @@ static const struct flash_info macronix_parts[] = {
>         { "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
>         { "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
>         { "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
> -       { "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
> +       { "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128,
> +                             SECT_4K | SPI_NOR_4BIT_BP) },

I assume this won't work because it misses the SPI_NOR_HAS_LOCK flag.

Cheers,
ta

>         { "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
>         { "mx25u3235f",  INFO(0xc22536, 0, 64 * 1024,  64,
>                               SECT_4K | SPI_NOR_DUAL_READ |
> --
> 2.17.1
>