[PATCH 1/2] mtd: rawnand: gpmi: Fix the driver only sense CS0 R/B issue

[Sascha Hauer]

On Sat, Dec 05, 2020 at 12:30:03AM -0600, Han Xu wrote:
> set the GPMI CTRL1 GANGED_RDYBUSY bit so dirver can sense the R/B signal
> from all CS.
> 
> For the NAND chip MT29F64G08AFAAAWP, only the first chip detected
> without the patch.
> 
> [    3.764118] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x68
> [    3.770613] nand: Micron MT29F64G08AFAAAWP
> [    3.774752] nand: 4096 MiB, SLC, erase size: 1024 KiB, page size: 8192, OOB size: 448
> [    3.786421] Bad block table found at page 524160, version 0x01
> [    3.792730] Bad block table found at page 524032, version 0x01
> 
> After applying the patch
> 
> [    3.764445] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x68
> [    3.770941] nand: Micron MT29F64G08AFAAAWP
> [    3.775080] nand: 4096 MiB, SLC, erase size: 1024 KiB, page size: 8192, OOB size: 448
> [    3.784390] nand: 2 chips detected
> [    3.790900] Bad block table found at page 524160, version 0x01
> [    3.796776] Bad block table found at page 1048448, version 0x01
> 
> Fixes: 3045f8e36963 ("mtd: rawnand: gpmi: move all driver code into single file")

I don't see how 3045f8e36963 changes his behaviour. Are you sure it
worked without this patch?

Sascha


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |