[PATCH 02/16] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs

Krzysztof Kozlowski krzk at kernel.org
Tue Aug 25 02:49:08 EDT 2020


On Tue, Aug 25, 2020 at 08:40:20AM +0200, Sascha Hauer wrote:
> On Mon, Aug 24, 2020 at 09:06:47PM +0200, Krzysztof Kozlowski wrote:
> > Driver requires different amount of clocks for different SoCs.  Describe
> > these requirements properly to fix dtbs_check warnings like:
> > 
> >     arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml: nand-controller at 33002000: clock-names:1: 'gpmi_apb' was expected
> > 
> > Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
> > ---
> >  .../devicetree/bindings/mtd/gpmi-nand.yaml    | 76 +++++++++++++++----
> >  1 file changed, 61 insertions(+), 15 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
> > index 28ff8c581837..9d764e654e1d 100644
> > --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx6q-gpmi-nand
> > +              - fsl,imx6sx-gpmi-nand
> > +    then:
> > +      properties:
> > +        clocks:
> > +          items:
> > +            - description: SoC gpmi io clock
> > +            - description: SoC gpmi apb clock
> > +            - description: SoC gpmi bch clock
> > +            - description: SoC gpmi bch apb clock
> > +            - description: SoC per1 bch clock
> > +        clock-names:
> > +          items:
> > +            - const: gpmi_io
> > +            - const: gpmi_apb
> > +            - const: gpmi_bch
> > +            - const: gpmi_bch_apb
> > +            - const: per1_bch
> 
> This enforces this specific order of the clocks given in the dts. The
> clock binding itself doesn't require any specific order, that's what we
> have the names array for.
> 
> Is this really what we want?

Indeed but have in mind that the specific order was there already. This
patch does not address that part, only number of clocks.

Fixing this for any order could be done with patterns. I can work on
that.

Best regards,
Krzysztof



More information about the linux-mtd mailing list