[PATCH] mtd: spi-nor: intel-spi: Do not try to make the SPI flash chip writable
Mika Westerberg
mika.westerberg at linux.intel.com
Mon Aug 24 05:44:48 EDT 2020
On Mon, Aug 24, 2020 at 11:31:40AM +0200, Arnd Bergmann wrote:
> On Mon, Aug 24, 2020 at 11:15 AM Mika Westerberg
> <mika.westerberg at linux.intel.com> wrote:
> > On Mon, Aug 24, 2020 at 11:08:33AM +0200, Arnd Bergmann wrote:
> > > On Mon, Aug 24, 2020 at 10:22 AM Mika Westerberg
> > > <mika.westerberg at linux.intel.com> wrote:
> > > > On Sat, Aug 22, 2020 at 06:06:03PM +0200, Arnd Bergmann wrote:
> > > > > On Wed, Aug 19, 2020 at 11:11 AM Mika Westerberg
> > > > >
> > > > > The mtd core just checks both the permissions on the device node (which
> > > > > default to 0600 without any special udev rules) and the MTD_WRITEABLE
> > > > > on the underlying device that is controlled by the module parameter
> > > > > in case of intel-spi{,-platform,-pci}.c.
> > > >
> > > > OK, thanks.
> > > >
> > > > Since we cannot really get rid of the module parameter (AFAIK there are
> > > > users for it), I still think we should just make the "writeable" to
> > > > apply to the PCI part as well. That should at least make it consistent,
> > > > and it also solves Daniel's case.
> > >
> > > Can you explain Daniel's case then? I still don't understand what he
> > > actually wants.
> > >
> > > As I keep repeating, the module parameter *does* apply to the pci
> > > driver front-end since it determines whether the driver will disallow
> > > writes to the mtd device without it. The only difference is that the pci
> > > driver will attempt to set the hardware bit without checking the
> > > module parameter first, while the platform driver does not. If the
> > > module parameter is not set however, the state of the hardware
> > > bit is never checked again.
> >
> > I think Daniel wants the PCI driver not to set the hardware bit by
> > default (same as the platform driver).
>
> Sure, but *why*?
Because this is part of the platform firmware security check patch he is
also working on and, I guess making the flash chip writeable by default
is triggering some of the checks in that patch. Or something along those
lines ;-)
More information about the linux-mtd
mailing list