[PATCH] dt-bindings: Whitespace clean-ups in schema files
Sam Ravnborg
sam at ravnborg.org
Wed Aug 12 17:34:53 EDT 2020
Hi Rob.
On Wed, Aug 12, 2020 at 02:36:18PM -0600, Rob Herring wrote:
> Clean-up incorrect indentation, extra spaces, long lines, and missing
> EOF newline in schema files. Most of the clean-ups are for list
> indentation which should always be 2 spaces more than the preceding
> keyword.
>
> Found with yamllint (which I plan to integrate into the checks).
I have browsed through the patch - and there was only a few things
that jumped at me.
With these points considered:
Acked-by: Sam Ravnborg <sam at ravnborg.org>
I expect only some (few) of my points to actually results in any updates.
I look forward to have the lint functionality as part of the built-in
tools so we catch these things early.
Sam
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index f63895c8ce2d..88814a2a14a5 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -273,8 +273,8 @@ properties:
> - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
> - kontron,imx6ull-n6411-som # Kontron N6411 SOM
> - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
> - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board
> - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
> + - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board
> + - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
> - const: fsl,imx6ull
This change looks bad as it drops the alignment with the comments below.
See following patch chunck:
>
> - description: Kontron N6411 S Board
> @@ -312,9 +312,12 @@ properties:
> - toradex,colibri-imx7d # Colibri iMX7 Dual Module
> - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board
> - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module
> - - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
> - - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
> - - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
> + - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on
> + # Aster Carrier Board
> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> index 177d48c5bd97..e89c1ea62ffa 100644
> --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
> @@ -25,8 +25,7 @@ properties:
> compatible:
> items:
> - enum:
> - - dlink,dir-685-panel
> -
> + - dlink,dir-685-panel
> - const: ilitek,ili9322
>
> reset-gpios: true
> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> index a39332276bab..76a9068a85dd 100644
> --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
> @@ -13,8 +13,7 @@ properties:
> compatible:
> items:
> - enum:
> - - bananapi,lhr050h41
> -
> + - bananapi,lhr050h41
> - const: ilitek,ili9881c
>
The extra lines is a simple way to indicate that here shall be added
more in the future. So I like the empty line.
> diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> index 32e0896c6bc1..47938e372987 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> @@ -79,7 +79,8 @@ properties:
> description: |
> kHz; switching frequency.
> $ref: /schemas/types.yaml#/definitions/uint32
> - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
> + enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
> + 2400, 3200, 4800, 9600 ]
>
> qcom,ovp:
> description: |
In the modern world we are living in now line length of 100 chars are
OK. checkpatch and coding_style is updated to reflected this.
> diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> index 4ddb42a4ae05..9102feae90a2 100644
> --- a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> +++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
> @@ -33,4 +33,5 @@ examples:
> reg = <0x1f000000 0x10>;
> };
>
> -...
> \ No newline at end of file
> +...
> +
Added one line too much?
diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
> index 0ae692dc28b5..3d3fed63409b 100644
> --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
> @@ -43,47 +43,47 @@ properties:
> maxItems: 1
>
> required:
> - - compatible
> - - reg
> - - spi-max-frequency
> - - mux-controls
> + - compatible
> + - reg
> + - spi-max-frequency
> + - mux-controls
>
> examples:
> - - |
> - #include <dt-bindings/gpio/gpio.h>
> - mux: mux-controller {
> - compatible = "gpio-mux";
> - #mux-control-cells = <0>;
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + mux: mux-controller {
> + compatible = "gpio-mux";
> + #mux-control-cells = <0>;
>
> - mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> - };
> + mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> + };
Example is updated to use 4-space indent. I like.
But many other examples are left untouched.
So I wonder if updating all examples to the same indent should
be left for another mega-patch?
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index f3d847832fdc..2baee2c817c1 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -993,7 +993,8 @@ patternProperties:
> "^sst,.*":
> description: Silicon Storage Technology, Inc.
> "^sstar,.*":
> - description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.)
> + description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
> + (formerly part of MStar Semiconductor, Inc.)
> "^st,.*":
> description: STMicroelectronics
> "^starry,.*":
Did you check that they are all in alphabetical order?
I would be suprised if this is the only issue in this file.
More information about the linux-mtd
mailing list