[GIT PULL] mtd: nand: Changes for 5.9
Miquel Raynal
miquel.raynal at bootlin.com
Fri Aug 7 02:27:47 EDT 2020
Hello,
This is the NAND PR for 5.9.
Thanks,
Miquèl
The following changes since commit b3a9e3b9622ae10064826dccb4f7a52bd88c7407:
Linux 5.8-rc1 (2020-06-14 12:45:04 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/nand/for-5.9
for you to fetch changes up to da151e3458c825fa9d57c2db6e37748166e4d129:
dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags (2020-07-07 21:03:44 +0200)
----------------------------------------------------------------
Core changes:
* Drop useless 'depends on' in Kconfig
* Add an extra level in the Kconfig hierarchy
* Trivial spellings
* Dynamic allocation of the interface configurations
* Dropping the default ONFI timing mode
* Various cleanup (types, structures, naming, comments)
* Hide the chip->data_interface indirection
* Add the generic rb-gpios property
* Add the ->choose_interface_config() hook
* Introduce nand_choose_best_sdr_timings()
* Use default values for tPROG_max and tBERS_max
* Avoid redefining tR_max and tCCS_min
* Add a helper to find the closest ONFI mode
* bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
* fsl-upm: Deprecation of specific DT properties
* fsl_upm: Driver rework and cleanup in favor of ->exec_op()
* Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
* brcmnand: ECC error handling on EDU transfers
* brcmnand: Don't default to EDU transfers
* qcom: Set BAM mode only if not set already
* qcom: Avoid write to unavailable register
* gpio: Driver rework in favor of ->exec_op()
* tango: ->exec_op() conversion
* mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
* toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
* toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
* toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
* hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
----------------------------------------------------------------
Boris Brezillon (16):
mtd: rawnand: mtk: Convert the driver to exec_op()
mtd: rawnand: tango: Convert the driver to exec_op()
dt-bindings: mtd: nand: Document the generic rb-gpios property
mtd: rawnand: fsl_upm: Remove unused mtd var
mtd: rawnand: fsl_upm: Get rid of the unused fsl_upm_nand.parts field
mtd: rawnand: fsl_upm: Allocate the fsl_upm_nand object using devm_kzalloc()
mtd: rawnand: fsl_upm: Use devm_kasprintf() to allocate the MTD name
mtd: rawnand: fsl_upm: Use platform_get_resource() + devm_ioremap_resource()
mtd: rawnand: fsl_upm: Use gpio descriptors
mtd: rawnand: fsl_upm: Inherit from nand_controller
mtd: rawnand: fsl_upm: Implement exec_op()
mtd: rawnand: fsl_upm: Get rid of the legacy interface implementation
mtd: rawnand: gpio: Inherit from nand_controller
mtd: rawnand: gpio: Implement exec_op()
mtd: rawnand: gpio: Get rid of the legacy interface implementation
dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
Dan Carpenter (1):
mtd: rawnand: ingenic: cleanup ARRAY_SIZE() vs sizeof() use
Kamal Dasu (2):
mtd: rawnand: brcmnand: Don't default to edu transfer
mtd: rawnand: brcmnand: ECC error handling on EDU transfers
Kieran Bingham (1):
mtd: rawnand: trivial spelling
Miquel Raynal (31):
mtd: nand: Move nand_device forward declaration to the top
mtd: nand: Add an extra level in the Kconfig hierarchy
mtd: nand: Drop useless 'depends on' in Kconfig
mtd: nand: Rename a core structure
mtd: rawnand: Use unsigned types for nand_chip unsigned values
mtd: rawnand: Only use u8 instead of uint8_t in nand_chip structure
mtd: rawnand: Create a nand_chip operations structure
mtd: rawnand: Rename the manufacturer structure
mtd: rawnand: Declare the nand_manufacturer structure out of nand_chip
mtd: rawnand: Reorganize the nand_chip structure
mtd: rawnand: Compare the actual timing values
mtd: rawnand: Use the data interface mode entry when relevant
mtd: rawnand: Rename nand_has_setup_data_iface()
mtd: rawnand: Fix nand_setup_data_interface() description
mtd: rawnand: Rename nand_init_data_interface()
mtd: rawnand: timings: Update onfi_fill_data_interface() kernel doc
mtd: rawnand: timings: Provide onfi_fill_data_interface() with a data interface
mtd: rawnand: timings: onfi_fill_data_interface timing mode is unsigned
mtd: rawnand: timings: Add a helper to find the closest ONFI mode
mtd: rawnand: timings: Avoid redefining tR_max and tCCS_min
mtd: rawnand: timings: Use default values for tPROG_max and tBERS_max
mtd: rawnand: Hide the chip->data_interface indirection
mtd: rawnand: s/data_interface/interface_config/
mtd: rawnand: timings: Make onfi_fill_interface_config() a void helper
mtd: rawnand: Introduce nand_choose_best_sdr_timings()
mtd: rawnand: Add the ->choose_interface_config() hook
mtd: rawnand: toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
mtd: rawnand: toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
mtd: rawnand: hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
mtd: rawnand: Get rid of the default ONFI timing mode
mtd: rawnand: Allocate the interface configurations dynamically
Rickard x Andersson (1):
mtd: rawnand: toshiba: Choose the interface configuration for TH58NVG2S3HBAI4
Sivaprakash Murugesan (2):
mtd: rawnand: qcom: avoid write to unavailable register
mtd: rawnand: qcom: set BAM mode only if not set already
Álvaro Fernández Rojas (1):
mtd: parsers: bcm63xx: simplify CFE detection
Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt | 10 +-
.../devicetree/bindings/mtd/nand-controller.yaml | 7 +
drivers/mtd/nand/Kconfig | 5 +
drivers/mtd/nand/onenand/Kconfig | 1 -
drivers/mtd/nand/raw/Kconfig | 1 -
drivers/mtd/nand/raw/ams-delta.c | 6 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 6 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 34 +--
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 31 ++-
drivers/mtd/nand/raw/cadence-nand-controller.c | 6 +-
drivers/mtd/nand/raw/denali.c | 8 +-
drivers/mtd/nand/raw/fsl_upm.c | 311 ++++++++---------------
drivers/mtd/nand/raw/fsmc_nand.c | 6 +-
drivers/mtd/nand/raw/gpio.c | 112 ++++++--
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 6 +-
drivers/mtd/nand/raw/ingenic/jz4740_ecc.c | 4 +-
drivers/mtd/nand/raw/internals.h | 23 +-
drivers/mtd/nand/raw/marvell_nand.c | 18 +-
drivers/mtd/nand/raw/meson_nand.c | 14 +-
drivers/mtd/nand/raw/mtk_nand.c | 122 +++++----
drivers/mtd/nand/raw/mxc_nand.c | 22 +-
drivers/mtd/nand/raw/mxic_nand.c | 6 +-
drivers/mtd/nand/raw/nand_base.c | 279 +++++++++++---------
drivers/mtd/nand/raw/nand_bbt.c | 2 +-
drivers/mtd/nand/raw/nand_hynix.c | 16 +-
drivers/mtd/nand/raw/nand_ids.c | 24 +-
drivers/mtd/nand/raw/nand_legacy.c | 7 +-
drivers/mtd/nand/raw/nand_macronix.c | 10 +-
drivers/mtd/nand/raw/nand_micron.c | 2 +-
drivers/mtd/nand/raw/nand_timings.c | 116 ++++++---
drivers/mtd/nand/raw/nand_toshiba.c | 72 +++++-
drivers/mtd/nand/raw/qcom_nandc.c | 18 +-
drivers/mtd/nand/raw/s3c2410.c | 6 +-
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 6 +-
drivers/mtd/nand/raw/sunxi_nand.c | 6 +-
drivers/mtd/nand/raw/tango_nand.c | 149 ++++++-----
drivers/mtd/nand/raw/tegra_nand.c | 6 +-
drivers/mtd/parsers/bcm63xxpart.c | 32 +--
include/linux/mtd/nand.h | 12 +-
include/linux/mtd/rawnand.h | 267 +++++++++----------
include/linux/mtd/spinand.h | 2 +-
41 files changed, 1031 insertions(+), 760 deletions(-)
More information about the linux-mtd
mailing list