[PATCH v5 3/6] mtd: spi-nor: Extend the SR Read Back test

Vignesh Raghavendra vigneshr at ti.com
Fri Nov 8 08:03:41 PST 2019



On 07-Nov-19 2:11 PM, Tudor.Ambarus at microchip.com wrote:
> From: Tudor Ambarus <tudor.ambarus at microchip.com>
> 
> Test that all the bits from Status Register 1 and Status Register 2
> were written correctly.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>

Reviewed-by: Vignesh Raghavendra <vigneshr at ti.com>

Regards
Vignesh

> ---
>  drivers/mtd/spi-nor/spi-nor.c | 58 +++++++++++++++++++++++++++++--------------
>  1 file changed, 39 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 06aac894ee6d..d33ad56d3b67 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -2047,20 +2047,7 @@ static int macronix_quad_enable(struct spi_nor *nor)
>  
>  	nor->bouncebuf[0] |= SR_QUAD_EN_MX;
>  
> -	ret = spi_nor_write_sr(nor, nor->bouncebuf, 1);
> -	if (ret)
> -		return ret;
> -
> -	ret = spi_nor_read_sr(nor, nor->bouncebuf);
> -	if (ret)
> -		return ret;
> -
> -	if (!(nor->bouncebuf[0] & SR_QUAD_EN_MX)) {
> -		dev_dbg(nor->dev, "Macronix Quad bit not set\n");
> -		return -EIO;
> -	}
> -
> -	return 0;
> +	return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]);
>  }
>  
>  /**
> @@ -2080,6 +2067,7 @@ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor)
>  {
>  	u8 *sr_cr = nor->bouncebuf;
>  	int ret;
> +	u8 sr_written;
>  
>  	/* Keep the current value of the Status Register. */
>  	ret = spi_nor_read_sr(nor, sr_cr);
> @@ -2088,7 +2076,22 @@ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor)
>  
>  	sr_cr[1] = CR_QUAD_EN_SPAN;
>  
> -	return spi_nor_write_sr(nor, sr_cr, 2);
> +	ret = spi_nor_write_sr(nor, sr_cr, 2);
> +	if (ret)
> +		return ret;
> +
> +	sr_written = sr_cr[0];
> +
> +	ret = spi_nor_read_sr(nor, sr_cr);
> +	if (ret)
> +		return ret;
> +
> +	if (sr_cr[0] != sr_written) {
> +		dev_err(nor->dev, "SR: Read back test failed\n");
> +		return -EIO;
> +	}
> +
> +	return 0;
>  }
>  
>  /**
> @@ -2108,6 +2111,7 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor)
>  {
>  	u8 *sr_cr = nor->bouncebuf;
>  	int ret;
> +	u8 sr_written;
>  
>  	/* Check current Quad Enable bit value. */
>  	ret = spi_nor_read_cr(nor, &sr_cr[1]);
> @@ -2128,13 +2132,26 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor)
>  	if (ret)
>  		return ret;
>  
> +	sr_written = sr_cr[0];
> +
> +	ret = spi_nor_read_sr(nor, sr_cr);
> +	if (ret)
> +		return ret;
> +
> +	if (sr_written != sr_cr[0]) {
> +		dev_err(nor->dev, "SR: Read back test failed\n");
> +		return -EIO;
> +	}
> +
> +	sr_written = sr_cr[1];
> +
>  	/* Read back and check it. */
>  	ret = spi_nor_read_cr(nor, &sr_cr[1]);
>  	if (ret)
>  		return ret;
>  
> -	if (!(sr_cr[1] & CR_QUAD_EN_SPAN)) {
> -		dev_dbg(nor->dev, "Spansion Quad bit not set\n");
> +	if (sr_cr[1] != sr_written) {
> +		dev_dbg(nor->dev, "CR: Read back test failed\n");
>  		return -EIO;
>  	}
>  
> @@ -2157,6 +2174,7 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
>  {
>  	u8 *sr2 = nor->bouncebuf;
>  	int ret;
> +	u8 sr2_written;
>  
>  	/* Check current Quad Enable bit value. */
>  	ret = spi_nor_read_sr2(nor, sr2);
> @@ -2172,13 +2190,15 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
>  	if (ret)
>  		return ret;
>  
> +	sr2_written = *sr2;
> +
>  	/* Read back and check it. */
>  	ret = spi_nor_read_sr2(nor, sr2);
>  	if (ret)
>  		return ret;
>  
> -	if (!(*sr2 & SR2_QUAD_EN_BIT7)) {
> -		dev_dbg(nor->dev, "SR2 Quad bit not set\n");
> +	if (*sr2 != sr2_written) {
> +		dev_dbg(nor->dev, "SR2: Read back test failed\n");
>  		return -EIO;
>  	}
>  
> 



More information about the linux-mtd mailing list