[PATCH v4 16/20] mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1

Tudor.Ambarus at microchip.com Tudor.Ambarus at microchip.com
Sat Nov 2 04:23:52 PDT 2019


From: Tudor Ambarus <tudor.ambarus at microchip.com>

JEDEC Basic Flash Parameter Table, 15th DWORD, bits 22:20,
refers to this bit as "bit 1 of the status register 2".
Rename the macro accordingly.

Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
 drivers/mtd/spi-nor/spi-nor.c | 10 +++++-----
 include/linux/mtd/spi-nor.h   |  4 +---
 2 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 8f11c00e8ae5..e367a4862ec1 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1026,7 +1026,7 @@ static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
 		 * Write Status (01h) command is available just for the cases
 		 * in which the QE bit is described in SR2 at BIT(1).
 		 */
-		sr_cr[1] = CR_QUAD_EN_SPAN;
+		sr_cr[1] = SR2_QUAD_EN_BIT1;
 	} else {
 		sr_cr[1] = 0;
 	}
@@ -2074,7 +2074,7 @@ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor)
 	if (ret)
 		return ret;
 
-	sr_cr[1] = CR_QUAD_EN_SPAN;
+	sr_cr[1] = SR2_QUAD_EN_BIT1;
 
 	ret = spi_nor_write_sr(nor, sr_cr, 2);
 	if (ret)
@@ -2118,10 +2118,10 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor)
 	if (ret)
 		return ret;
 
-	if (sr_cr[1] & CR_QUAD_EN_SPAN)
+	if (sr_cr[1] & SR2_QUAD_EN_BIT1)
 		return 0;
 
-	sr_cr[1] |= CR_QUAD_EN_SPAN;
+	sr_cr[1] |= SR2_QUAD_EN_BIT1;
 
 	/* Keep the current value of the Status Register. */
 	ret = spi_nor_read_sr(nor, sr_cr);
@@ -2256,7 +2256,7 @@ static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor)
 	 * When the configuration register Quad Enable bit is one, only the
 	 * Write Status (01h) command with two data bytes may be used.
 	 */
-	if (sr_cr[1] & CR_QUAD_EN_SPAN) {
+	if (sr_cr[1] & SR2_QUAD_EN_BIT1) {
 		ret = spi_nor_read_sr(nor, sr_cr);
 		if (ret)
 			return ret;
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index d6ec55cc6d97..f626e0e52909 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -144,10 +144,8 @@
 #define FSR_P_ERR		BIT(4)	/* Program operation status */
 #define FSR_PT_ERR		BIT(1)	/* Protection error bit */
 
-/* Configuration Register bits. */
-#define CR_QUAD_EN_SPAN		BIT(1)	/* Spansion Quad I/O */
-
 /* Status Register 2 bits. */
+#define SR2_QUAD_EN_BIT1	BIT(1)
 #define SR2_QUAD_EN_BIT7	BIT(7)
 
 /* Supported SPI protocols */
-- 
2.9.5




More information about the linux-mtd mailing list