[PATCH v5 4/5] dt-bindings: mtd: Add bindings for TI's AM654 HyperBus memory controller

Sergei Shtylyov sergei.shtylyov at cogentembedded.com
Mon Jun 10 09:25:21 PDT 2019


Hello!

On 06/09/2019 01:32 PM, Vignesh Raghavendra wrote:

> Add binding documentation for TI's HyperBus memory controller present on
> AM654 SoC.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
> ---
> v5:
> Update binding example to show MMIO mux
> Fix reg property for flash slave.
> 
>  .../devicetree/bindings/mtd/ti,am654-hbmc.txt | 51 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> new file mode 100644
> index 000000000000..c2a2c2b42a92
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> @@ -0,0 +1,51 @@
> +Bindings for HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs
> +
> +Required properties:
> +- compatible : "ti,am654-hbmc" for AM654 SoC
> +- reg : Two entries:
> +	First entry pointed to the register space of HBMC controller
> +	Second entry pointing to the memory map region dedicated for
> +	MMIO access to attached flash devices
> +- ranges : Address translation from offset within CS to allocated MMIO
> +	   space in SoC
> +
> +Optional properties:
> +- mux-controls : phandle to the multiplexer that controls selection of
> +		 HBMC vs OSPI inside Flash SubSystem. Default is OSPI,
> +		 if property is absent.
> +		 See Documentation/devicetree/bindings/mux/reg-mux.txt
> +		 for mmio-mux binding details
> +
> +Example:
> +
> +	fss: fss at 47000000 {

   What's FSS?
   Regardless of the answer, the node names should be generic, like "memory-controller@".

> +		compatible = "syscon", "simple-mfd";

   If it's "sycon", the nme should probably be "system-controller".

> +		reg = <0x0 0x47000000 0x0 0x100>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hbmc_mux: hbmc-mux {

   So, just "multiplexor"?

> +			compatible = "mmio-mux";
> +			#mux-control-cells = <1>;
> +			mux-reg-masks = <0x4 0x2>; /* 0: reg 0x4, bit 1 */
> +		};
> +
> +		hbmc: hbmc at 47034000 {

   Should be named "memory-controller at 47034000", according to the DT spec.

> +			compatible = "ti,am654-hbmc";
> +			reg = <0x0 0x47034000 0x0 0x100>,
> +				<0x5 0x00000000 0x1 0x0000000>;
> +			power-domains = <&k3_pds 55>;
> +			#address-cells = <2>;
> +			#size-cells = <1>;
> +			ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
> +				 <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
> +			mux-controls = <&hbmc_mux 0>;
> +
> +			/* Slave flash node */
> +			flash at 0,0 {
> +				compatible = "cypress,hyperflash", "cfi-flash";
> +				reg = <0x0 0x0 0x4000000>;
> +			};
> +		};
> +	};
[...]

MBR, Sergei



More information about the linux-mtd mailing list