[PATCH 14/14] mtd: rawnand: gpmi: Implement exec_op

Miquel Raynal miquel.raynal at bootlin.com
Mon Jun 3 01:02:58 PDT 2019

On Tue, 2019-05-21 at 07:06:43 UTC, Sascha Hauer wrote:
> The gpmi driver performance suffers from NAND operations being split
> in multiple small DMA transfers. This has been forced by the NAND layer
> in the former days, but now with exec_op we can use the controller as
> intended.
> With this patch gpmi_nfc_exec_op becomes the main entry point to NAND
> operations. Here all instructions are collected and chained as separate
> DMA transfers. In the end whole chain is fired and waited to be
> finished. gpmi_nfc_exec_op only does the hardware operations, bad block
> marker swapping and buffer scrambling is done by the callers. It's worth
> noting that the nand_*_op functions always take the buffer lengths for
> the data that the NAND chip actually transfers. When doing BCH we have
> to calculate the net data size from the raw data size in some places.
> This patch has been tested with 2048/64 and 2048/128 byte NAND on
> i.MX6q. mtd_oobtest, mtd_subpagetest and mtd_speedtest run without
> errors. nandbiterrs, nandpagetest and nandsubpagetest userspace tests
> from mtdutils run without errors and UBIFS can successfully be mounted.
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.


More information about the linux-mtd mailing list