[PATCH v2 0/5] MTK NAND driver improvements and fixes

Xiaolei Li xiaolei.li at mediatek.com
Tue Apr 30 03:02:45 PDT 2019


The following patch set mainly contains:
* Fix low level time calculation of read/write cycle to meet tRC_min
  and tWC_min requirements.
* Refine RE# pulse width calculation and data sampling to improve read
  performance.
* Add CS validity check.
* Fix oob buffer pointer wrongly setting and empty page threshold setting.

Changes on v2 relative to:
--------------------

tree    : git://git.infradead.org/linux-mtd.git
branch  : master
commit  :
        'commit 3e35730dd754 ("mtd: powernv_flash: Fix device
         registration error")

Patch v2:
---------
- Fix type
- Reference correct faulty patch
- Refine code to do calculation and condition in separate steps
- Fix empty threshold calculation

Tests:
------

* ubifs and jffs2 are validated on NAND device MT29F16G08ADBCA by
  'dd' command.
* all drivers/mtd/tests/* pass.
* speed test:
  eraseblock write speed is 11087 KiB/s
  eraseblock read speed is 19986 KiB/s
  page write speed is 10689 KiB/s
  page read speed is 18724 KiB/s
  2 page write speed is 10611 KiB/s
  2 page read speed is 18713 KiB/s
  erase speed is 103696 KiB/s
  2x multi-block erase speed is 354248 KiB/s
  4x multi-block erase speed is 350459 KiB/s
  8x multi-block erase speed is 356173 KiB/s
  16x multi-block erase speed is 356173 KiB/s
  32x multi-block erase speed is 358120 KiB/s
  64x multi-block erase speed is 356173 KiB/s

Xiaolei Li (5):
  mtd: rawnand: mtk: Correct low level time calculation of r/w cycle
  mtd: rawnand: mtk: Improve data sampling timing for read cycle
  mtd: rawnand: mtk: Add validity check for CE# pin setting
  mtd: rawnand: mtk: Fix wrongly assigned OOB buffer pointer issue
  mtd: rawnand: mtk: Setup empty page threshold correctly

 drivers/mtd/nand/raw/mtk_nand.c | 93 ++++++++++++++++++++++++++++-----
 1 file changed, 79 insertions(+), 14 deletions(-)

-- 
2.18.0





More information about the linux-mtd mailing list