[PATCH v6 7/7] mtd: rawnand: AMD: Also use the last page for bad block markers

Schrempf Frieder frieder.schrempf at kontron.de
Wed Apr 17 05:36:37 PDT 2019


From: Frieder Schrempf <frieder.schrempf at kontron.de>

According to the datasheet of some Cypress SLC NANDs, the bad
block markers can be in the first, second or last page of a block.
So let's check all three locations.

Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
Reviewed-by: Boris Brezillon <bbrezillon at kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/raw/nand_amd.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/nand_amd.c b/drivers/mtd/nand/raw/nand_amd.c
index 1417559d3057..6217555c19a6 100644
--- a/drivers/mtd/nand/raw/nand_amd.c
+++ b/drivers/mtd/nand/raw/nand_amd.c
@@ -45,7 +45,13 @@ static void amd_nand_decode_id(struct nand_chip *chip)
 static int amd_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
-		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
+		/*
+		 * According to the datasheet of some Cypress SLC NANDs,
+		 * the bad block markers can be in the first, second or last
+		 * page of a block. So let's check all three locations.
+		 */
+		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE |
+				 NAND_BBM_LASTPAGE;
 
 	return 0;
 }
-- 
2.17.1



More information about the linux-mtd mailing list