[PATCH v2] mtd: rawnand: marvell: Clean the controller state before each operation

Miquel Raynal miquel.raynal at bootlin.com
Mon Apr 8 01:31:45 PDT 2019


Since the migration of the driver to stop using the legacy
->select_chip() hook, there is nothing deselecting the target anymore,
thus the selection is not forced at the next access. Ensure the ND_RUN
bit and the interrupts are always in a clean state.

Cc: Daniel Mack <daniel at zonque.org>
Cc: stable at vger.kernel.org
Fixes: b25251414f6e00 ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Suggested-by: Boris Brezillon <boris.brezillon at collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---

Changes in v2:
* Also include the reset of the interrupts each time
  marvell_nfc_select_target() is called.

 drivers/mtd/nand/raw/marvell_nand.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index f38e5c1b87e4..d984538980e2 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -722,12 +722,6 @@ static void marvell_nfc_select_target(struct nand_chip *chip,
 	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
 	u32 ndcr_generic;
 
-	if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die)
-		return;
-
-	writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0);
-	writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1);
-
 	/*
 	 * Reset the NDCR register to a clean state for this particular chip,
 	 * also clear ND_RUN bit.
@@ -739,6 +733,12 @@ static void marvell_nfc_select_target(struct nand_chip *chip,
 	/* Also reset the interrupt status register */
 	marvell_nfc_clear_int(nfc, NDCR_ALL_INT);
 
+	if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die)
+		return;
+
+	writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0);
+	writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1);
+
 	nfc->selected_chip = chip;
 	marvell_nand->selected_die = die_nr;
 }
-- 
2.19.1




More information about the linux-mtd mailing list