[PATCH] mtd: rawnand: marvell: Ensure the ND_RUN bit is reset

Boris Brezillon boris.brezillon at collabora.com
Mon Apr 8 01:07:47 PDT 2019


On Sun,  7 Apr 2019 21:34:01 +0200
Miquel Raynal <miquel.raynal at bootlin.com> wrote:

> Since the migration of the driver to stop using the legacy
> ->select_chip() hook, there is nothing deselecting the target anymore,  
> thus the selection is not forced at the next access. Ensure the ND_RUN
> bit is always in a clean state.
> 
> Cc: Daniel Mack <daniel at zonque.org>
> Cc: stable at vger.kernel.org
> Fixes: b25251414f6e00 ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
> Suggested-by: Boris Brezillon <boris.brezillon at collabora.com>
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
> 
> Hi Daniel, could you please test this version of the fix?
> 
> Thanks,
> Miquèl
> 
> 
>  drivers/mtd/nand/raw/marvell_nand.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
> index f38e5c1b87e4..a7d7f17d8682 100644
> --- a/drivers/mtd/nand/raw/marvell_nand.c
> +++ b/drivers/mtd/nand/raw/marvell_nand.c
> @@ -722,12 +722,6 @@ static void marvell_nfc_select_target(struct nand_chip *chip,
>  	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
>  	u32 ndcr_generic;
>  
> -	if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die)
> -		return;
> -
> -	writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0);
> -	writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1);
> -
>  	/*
>  	 * Reset the NDCR register to a clean state for this particular chip,
>  	 * also clear ND_RUN bit.
> @@ -736,6 +730,12 @@ static void marvell_nfc_select_target(struct nand_chip *chip,
>  		       NDCR_GENERIC_FIELDS_MASK & ~NDCR_ND_RUN;
>  	writel_relaxed(ndcr_generic | marvell_nand->ndcr, nfc->regs + NDCR);
>  
> +	if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die)
> +		return;
> +
> +	writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0);
> +	writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1);
> +
>  	/* Also reset the interrupt status register */
>  	marvell_nfc_clear_int(nfc, NDCR_ALL_INT);

I think this should also be moved before the

	if (chip == nfc->selected_chip &&
	    die_nr == marvell_nand->selected_die)

check.



More information about the linux-mtd mailing list